YINGHUA
YINGHUA 3.175X28 One Flute Up Down Cut Carbide Mill Tool Cutter Bits 5pcs
A five-piece set of 3.175×28 mm single-flute up-down cut carbide end mills for compression cutting of wood, plywood and particleboard
- TypeRight-Angle Drills
- 5-piece carbide set covers multiple CNC jobs
- 175 mm diameter suits fine detail routing
- 28 mm cutting length handles thick stock
- Up-down spiral compresses fibres for clean edges
- Tungsten steel resists wear in wood and composites
Five-piece carbide milling set
This set supplies five one-flute up-down cut carbide mill cutters sized 3.175X28 for CNC machinery. The tools are made from tungsten steel and are intended for cutting wood, plywood, density board, solid wood and particleboard. They are sold as industrial cutting items and are not for use by anyone under 18 years old.
Sustained cutting performance
The up-down spiral geometry produces a compression cut that reduces tear-out on both faces of the workpiece during extended milling sessions. Tungsten steel construction maintains edge retention across repeated passes in dense materials such as particleboard and solid wood. The single-flute design clears chips efficiently to prevent clogging during long runs.
Thermal and power behaviour
Carbide tips dissipate heat effectively so the cutters stay sharp throughout normal CNC routing operations. The one-flute profile lowers cutting resistance which reduces spindle load and power draw on the machine. Quiet, vibration-free cutting results from the balanced spiral geometry in typical woodworking applications.
Highlights
- 5-piece carbide set covers multiple CNC jobs
- 175 mm diameter suits fine detail routing
- 28 mm cutting length handles thick stock
- Up-down spiral compresses fibres for clean edges
- Tungsten steel resists wear in wood and composites
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
How much heat does the 3.175 mm tungsten-steel bit generate when running continuously in a CNC router?
The single-flute up/down spiral geometry clears chips efficiently, reducing friction and heat build-up during extended cuts in wood, plywood or particleboard.
What collet or chuck size must I already have to hold the 3.175 mm shank?
A 3.175 mm (1/8 inch) ER collet or compatible drill chuck is required; the shank diameter matches that exact size.
Will these compression bits work reliably on an older CNC machine with lower spindle rigidity?
Yes — the up/down flute design compresses material toward the centre, minimising vibration even on less rigid frames.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
