YINGHUA
YINGHUA 3.175X25X50M Two Flutes UP DOWN Cut Carbide Mill Cutter Bit
A two-flute up-down spiral carbide cutter with 3.175 mm shank, 25 mm cutting length and 50 mm overall length for compression cutting of wood, plywood, density board and particleboard
- TypeRight-Angle Drills
- Two-flute up/down spiral gives clean top and bottom edges
- Tungsten-steel body resists wear during long CNC runs
- 175 mm shank fits standard collets without adapters
- 25 mm cutting length handles thick stock in one pass
- Rated for industrial use only — not for users under 18
Tungsten steel router bit for CNC wood
This single-flute carbide cutter is designed for CNC machinery and handles wood, plywood, density board, solid wood and particleboard. The up-and-down spiral geometry compresses material during cutting to reduce tear-out on both faces. It is intended for industrial use only and not for anyone under 18 years of age.
Compression spiral limits chip evacuation in deep
The opposing helix directions pull chips toward the centre of the cut, which works well for through-cuts in sheet goods but can trap debris in blind pockets or deep grooves. The 3.175 mm shank diameter restricts the tool to collets or chucks that accept this exact size, so spindle compatibility must be verified before use.
Solid carbide construction resists wear
Tungsten steel retains its edge longer than high-speed steel when machining particleboard or fibre-reinforced plastics, reducing the frequency of tool changes. The single-piece package delivers one cutter ready for immediate mounting, with no additional hardware or collets supplied.
Highlights
- Two-flute up/down spiral gives clean top and bottom edges
- Tungsten-steel body resists wear during long CNC runs
- 175 mm shank fits standard collets without adapters
- 25 mm cutting length handles thick stock in one pass
- Rated for industrial use only — not for users under 18
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
Should I choose the 3.175 mm shank version or a different diameter for my CNC collet?
The cutter has a 3.175 mm shank; select this version only if your collet or holder is sized for 3.175 mm, otherwise choose a matching diameter.
What does the 25 mm cutting length mean when the bit is in the spindle?
You can plunge or profile up to 25 mm deep in a single pass before the shank contacts the workpiece.
How does the up-down spiral geometry affect chip evacuation in wood and PVC?
The opposing flutes push chips both upward and downward, compressing the material and reducing tear-out on both faces during compression cuts.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
