YINGHUA
YINGHUA 3.175X22X45MM Two Flutes UP And DOWN Cut Spiral Carbide Mill Cutter Bits
A single 3.175 mm shank compression router bit with 22 mm cut length and 45 mm overall length cuts wood, plywood and density board cleanly on both faces
- TypeRight-Angle Drills
- Two-flute up/down spiral gives clean edges on both faces
- 175 mm shank fits standard CNC collets
- 22 mm cutting length handles thick stock in one pass
- Tungsten-steel body keeps sharpness through abrasive wood composites
- Suitable for plywood, solid wood and particleboard
Precision compression cutter for CNC woodwork
This 3.175 mm shank carbide mill cutter is designed for CNC routers cutting wood, plywood, density board, solid wood and particleboard. Its up-and-down spiral geometry compresses the workpiece from both faces to reduce tear-out on double-sided material. The tool suits hobbyists and small shops needing clean edges on laminates and veneers.
Fits standard 3.175 mm collets on desktop CNC
The cutter requires a compatible 3.175 mm ER collet or chuck and a spindle capable of the speeds recommended for tungsten steel tooling. It replaces worn compression bits without changing holders, freeing the operator from sourcing separate up-cut and down-cut tools for through-cuts. Industrial use only; not for persons under 18 years.
Tungsten steel resists wear during long profiling
The solid carbide body maintains edge geometry through extended passes in abrasive sheet goods such as particleboard and MDF. Compression action continuously shears fibres toward the centre, limiting heat build-up that dulls single-direction flutes. The 22 mm flute length and 45 mm overall length support deep pockets without excessive tool overhang.
Highlights
- Two-flute up/down spiral gives clean edges on both faces
- 175 mm shank fits standard CNC collets
- 22 mm cutting length handles thick stock in one pass
- Tungsten-steel body keeps sharpness through abrasive wood composites
- Suitable for plywood, solid wood and particleboard
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
How deep can the 22 mm flute cut before the 45 mm overall length becomes the limit?
The 22 mm flute length sets the maximum cutting depth; the 45 mm overall length leaves the remaining shank for the collet.
Does the tungsten-steel body stay cool enough for continuous CNC routing in plywood?
Tungsten steel resists heat buildup during prolonged cuts in wood, plywood and density board.
What shank diameter must my CNC spindle or router accept to hold the 3.175 mm shank?
The cutter has a 3.175 mm shank, so the machine needs a matching 3.175 mm collet or chuck.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
