YINGHUA
YINGHUA 3.175X22X45mm Blue 3A UP DOWN Compound Single Flute Spiral Carbide Mill Tool Cutters
A single-flute carbide milling cutter for CNC routing wood, acrylic, PVC and density board
- TypeRight-Angle Drills
- Single-flute spiral clears chips fast with 22 mm cutting length
- Up-down compound geometry reduces tear-out on 45 mm overall length
- 175 mm shank fits standard CNC collets
- Tungsten steel carbide resists wear cutting acrylic, PVC, density board and wood
- Industrial-grade cutter restricted to users aged 18 and over
Precision CNC Router Bit
This YINGHUA carbide milling cutter measures 3.175 mm shank diameter, 22 mm flute length and 45 mm overall length. The single-flute up-down spiral geometry shears material on both faces for clean edges in wood, acrylic, PVC and density board. Tungsten steel construction resists wear during extended CNC routing sessions.
Ideal for Single-Edge Finishing
Woodworkers and sign-makers who need compression cuts on sheet goods will benefit from the up-down flute action. The tool is not suited for high-volume production runs that demand multi-flute chip evacuation or for operators under 18 years old due to the sharp cutting edges. Buyers needing larger shank diameters or longer reach must select a different cutter.
3.175 mm Shank Diameter
This shank size determines collet compatibility and must match the holder on your CNC spindle or router. Verify the machine accepts 3.175 mm shanks before purchase; no adapter or alternative shank is included in the single-piece package.
Highlights
- Single-flute spiral clears chips fast with 22 mm cutting length
- Up-down compound geometry reduces tear-out on 45 mm overall length
- 175 mm shank fits standard CNC collets
- Tungsten steel carbide resists wear cutting acrylic, PVC, density board and wood
- Industrial-grade cutter restricted to users aged 18 and over
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
Will the 3.175 mm shank fit the collet on my older CNC router?
The cutter has a 3.175 mm shank diameter, so it will fit any collet or chuck that accepts that exact size.
How can I confirm the up-down spiral is cutting cleanly on my first test piece?
Run a shallow pass in scrap wood; a clean top and bottom surface with no tear-out shows the compression geometry is working.
Does the single cutter come with any collets, wrenches or extra flutes?
The package contains only the one 3.175X22X45 mm carbide bit; collets, wrenches and additional cutters are sold separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
