YINGHUA
YINGHUA 3.175X22X45 DLC Coat Two Flutes UP DOWN Cut Carbide End Mill Cutter Bits 5pcs
Set of five DLC-coated carbide compression cutters with up-down flutes for clean cuts in wood, plywood and particleboard
- TypeRight-Angle Drills
- 5-piece set covers multiple jobs
- DLC coating reduces wear on tungsten steel
- Up-down flute design gives clean compression cuts
- 175 mm shank fits standard CNC collets
- Suited for wood, plywood, density board, particleboard
Precision Carbide Mill Cutters for CNC
This five-piece set of tungsten steel end mills is built for CNC machinery that demands clean compression cuts. Each cutter measures 3.175 by 22 by 45 millimetres and carries a DLC coating for wear resistance. The two-flute up-and-down spiral geometry suits wood, plywood, density board, solid wood and particleboard. Industrial users needing reliable replacement tooling will find the cutters match standard collet sizes.
Two-Flute Compression Geometry in a Build
The up-and-down flute design pushes chips both upward and downward, reducing tear-out on both faces of the workpiece. This frees the operator from sanding or secondary finishing on double-sided panels. The cutters require a CNC spindle or router collet that accepts a 3.175 millimetre shank and sufficient Z-travel to accommodate the 45 millimetre overall length. No additional tooling adapters are included in the single independent packages.
Replacing Worn Standard Router Bits
These cutters replace conventional single-direction spiral bits when top-and-bottom edge quality matters on sheet goods. The jump is worth it for production runs where delamination or fuzz on the underside slows throughput. They are not suited for metal, stone or abrasive composites, nor for handheld routers lacking rigid spindle runout control. Buyers needing larger diameters or extended reach should verify their machine clearance before ordering.
Highlights
- 5-piece set covers multiple jobs
- DLC coating reduces wear on tungsten steel
- Up-down flute design gives clean compression cuts
- 175 mm shank fits standard CNC collets
- Suited for wood, plywood, density board, particleboard
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
How deep can the 45 mm cutting length go before the tool hits its limit in a long production run?
The 45 mm cutting length sets the maximum depth per pass; sustained use beyond that requires multiple passes or a longer tool.
Will the tungsten steel body and DLC coating keep heat and noise low during all-day CNC routing?
Tungsten steel with DLC coating resists heat buildup and reduces friction, helping the cutter run cooler and quieter during extended sessions.
What shank size must my CNC collet or router accept to hold these 3.175 mm bits?
Your machine needs a 3.175 mm (1/8 inch) collet or chuck to grip the shank of each end mill securely.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
