YINGHUA
YINGHUA 3.175X22X45 BlueNano Two Flutes UP And DOWN Cut Spiral Carbide Mill Cutters fastener
A tungsten-steel compression cutter with up-and-down flutes for clean cuts in wood, plywood and particleboard
- TypeRight-Angle Drills
- BlueNano coating extends tool life for clean cuts
- Up-and-down spiral geometry compresses material to prevent tear-out on both faces
- Two-flute carbide design balances chip clearance with edge strength for wood and PVC
- Tungsten steel construction resists wear during prolonged CNC routing sessions
- 175 mm shank fits standard collets for quick tool changes
CNC Router Bit for Wood and PVC
This single-flute carbide milling cutter is designed for CNC machinery and handles wood, plywood, density board, solid wood and particleboard. The tungsten steel construction provides a precise cutting experience for compression milling tasks. It measures 3.175 mm in shank diameter with a 22 mm cutting length and 45 mm overall length.
Unsuitable for Non-Industrial or Under-18 Use
The cutter is intended strictly for industrial cutting applications and must not be used by anyone under 18 years of age. It is not designed for hazardous materials or general DIY tasks outside a workshop environment. Buyers needing multi-piece sets or cutters for metal or stone should look elsewhere.
3.175 mm Shank with Up-Down Compression Geometry
The shank diameter of 3.175 mm determines compatibility with your CNC collet or router chuck. The two-flute up-and-down spiral design compresses chips toward the centre for cleaner edges on double-sided laminates. Verify that your machine accepts this exact shank size before purchasing.
Highlights
- BlueNano coating extends tool life for clean cuts
- Up-and-down spiral geometry compresses material to prevent tear-out on both faces
- Two-flute carbide design balances chip clearance with edge strength for wood and PVC
- Tungsten steel construction resists wear during prolonged CNC routing sessions
- 175 mm shank fits standard collets for quick tool changes
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
What shank diameter does the 3.175 mm cutter need in the collet?
The cutter has a 3.175 mm shank, so the collet or chuck must accept that exact diameter for a secure grip.
How do I orient the up-and-down flutes when installing the bit in my CNC router?
Insert the bit so the up-cut flutes face the spindle and the down-cut flutes face the workpiece; this pulls chips up while pressing the material down for a clean edge.
When should I replace the tungsten-steel cutter based on the materials I cut?
Replace the cutter when cutting wood, plywood, density board, solid wood or particleboard leaves fuzzy edges, burn marks or requires noticeably higher feed pressure.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
