YINGHUA
YINGHUA 3.175X17X38mm Rainbow carbide end mill cutter
Cuts acrylic, PVC, density board and wood with a 3.175×17×38 mm one-flute spiral carbide bit
- TypeRight-Angle Drills
- Precise CNC routing with up-down compound spiral geometry
- Single-flute carbide design clears chips fast in wood and plastic
- Tungsten-steel construction resists wear during extended cutting sessions
- 175 mm shank fits standard collets for quick tool changes
- Suitable for acrylic, PVC, density board and wood board
YINGHUA 3.175 mm shank carbide end mill
The YINGHUA Rainbow carbide end mill cutter measures 3.175 by 17 by 38 millimetres and features a one-flute up-down spiral design. It is made from tungsten steel for durable cutting performance on CNC machinery. The tool is supplied as a single piece for compression wood routing tasks.
Cuts acrylic PVC density board and wood
This cutter suits operators who need a single-flute compression bit for clean edges on acrylic, PVC, density board and wood board. It is not for buyers who require multi-flute geometry for faster chip evacuation or different cutting profiles. The bladed product is restricted to users aged 18 and over and intended for industrial cutting only.
3.175 by 17 by 38 mm one-flute up-down spiral
The critical specification is the 3.175 mm shank diameter combined with a 17 mm cutting length and 38 mm overall length in a one-flute up-down spiral configuration. This geometry determines whether the bit matches the collet size and depth requirements of the specific CNC job.
Highlights
- Precise CNC routing with up-down compound spiral geometry
- Single-flute carbide design clears chips fast in wood and plastic
- Tungsten-steel construction resists wear during extended cutting sessions
- 175 mm shank fits standard collets for quick tool changes
- Suitable for acrylic, PVC, density board and wood board
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
How deep can the 17 mm flute cut in a single pass?
The 17 mm flute length sets the maximum depth of cut per pass, so you can plunge up to that depth in acrylic, PVC, density board or wood board.
Does the tungsten-steel cutter run hot during continuous CNC routing?
The single-flute carbide design clears chips efficiently, keeping the tool cooler during sustained cuts in wood, acrylic and PVC boards.
What shank size must my CNC collet accept for this 3.175 mm shank cutter?
Your collet or tool holder must grip a 3.175 mm shank, the exact diameter of this rainbow-coated end mill.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
