YINGHUA
YINGHUA 3.175X17X38mm Blue 3A UP DOWN Compound Single Flute Spiral Carbide Mill Tool Cutter
Single-flute carbide mill cutter with up-down spiral for compression cutting in wood, acrylic and PVC boards
- TypeRight-Angle Drills
- Precise cuts in wood and plastics with single-flute up-down spiral geometry
- Tungsten steel carbide construction resists wear during CNC routing
- 175 mm shank fits standard collets for quick tool changes
- 17 mm cutting length handles typical board thicknesses in one pass
- 38 mm overall length keeps the tool rigid for stable milling
YINGHUA Carbide Mill Cutter 3.175X17X38mm
This single-flute carbide mill cutter is designed for CNC routing of wood, acrylic, PVC and density board. The up-down compound geometry produces a clean finish on both faces of the workpiece. It suits operators who need precise compression cutting in sheet materials.
Check shank diameter and collet compatibility
The cutter has a 3.175 mm shank diameter, 17 mm cutting length and 38 mm overall length. Verify that your machine’s collet or chuck accepts this shank size. Ensure the spindle speed and feed rates suit carbide tooling in the materials you plan to cut.
Sustained cutting in abrasive sheet goods
The tungsten-steel construction resists wear during long runs in wood, acrylic or PVC panels. The single-flute design clears chips efficiently, reducing heat buildup in deep slots. The tool is rated for industrial use only and must not be used by anyone under 18 years of age.
Highlights
- Precise cuts in wood and plastics with single-flute up-down spiral geometry
- Tungsten steel carbide construction resists wear during CNC routing
- 175 mm shank fits standard collets for quick tool changes
- 17 mm cutting length handles typical board thicknesses in one pass
- 38 mm overall length keeps the tool rigid for stable milling
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
What is included in the package and is a collet or holder supplied?
The package contains one up-and-down cut single-flute CNC router bit; a collet or holder is not included and must be sourced separately to fit the 3.175 mm shank.
Which version of this cutter should I choose for compression cutting in wood and acrylic?
The listed 3.175×17×38 mm blue 3A up-down compound single-flute carbide mill is the only version offered, designed for compression cuts in wood, acrylic, PVC and density board.
What does the 17 mm cutting length mean when the bit is mounted in a CNC router?
It provides up to 17 mm of effective cutting depth per pass, with the up-down flute geometry compressing chips top and bottom to reduce tear-out on both faces of the workpiece.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
