YINGHUA
YINGHUA 3.175X17X38 DLC Coat Two Flutes UP DOWN Cut Spiral Carbide Mill Cutter fastener
A 3.175 mm shank carbide mill cutter with DLC coating and up/down flutes for clean compression cuts in wood and PVC
- TypeRight-Angle Drills
- DLC coating reduces friction for cleaner cuts
- Up-down spiral geometry compresses fibres to prevent tear-out
- Tungsten steel body resists wear in abrasive materials
- 175 mm shank fits standard CNC collets
- Suitable for wood, plywood and particleboard
Cutting Tool for CNC Machinery
This carbide milling cutter is designed for precise cutting on CNC equipment. It features a tungsten steel construction with a DLC coating and a two-flute up-and-down spiral geometry. The single piece is suited for compression cutting tasks in a workshop or light industrial setting.
Wood and Composite Material Cutting
The cutter handles wood, plywood, density board, solid wood and particleboard effectively. It is not intended for users under 18 years of age. Buyers needing high-volume production tooling or cutters for metals and hazardous materials should evaluate alternative options.
Shank Diameter and Machine Compatibility
Verify that your CNC machine accepts a 3.175 mm shank before ordering. Confirm the 17 mm cutting length and 38 mm overall length suit your job requirements. Ensure your setup provides appropriate clamping and dust extraction for the materials listed.
Highlights
- DLC coating reduces friction for cleaner cuts
- Up-down spiral geometry compresses fibres to prevent tear-out
- Tungsten steel body resists wear in abrasive materials
- 175 mm shank fits standard CNC collets
- Suitable for wood, plywood and particleboard
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
What shank diameter must my CNC router's collet accept for this 3.175 mm carbide end mill?
The cutter has a 3.175 mm shank, so your machine needs a collet or chuck that grips that exact diameter.
Will the up-down spiral geometry cut cleanly on the plywood and density board I already process?
Yes, the two-flute compression design shears fibres both upward and downward, giving clean edges on plywood, density board, solid wood and particleboard.
How can I confirm the DLC coating is performing after the first few jobs?
Inspect the cut edges for clean, burn-free surfaces and check the flutes for minimal wear; the diamond-like carbon layer should keep the cutter sharp longer than uncoated carbide.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
