YINGHUA
YINGHUA 3.175X17 One Flute UP DOWN Cut Spiral Carbide Mill Tool Cutters fastener
Set of five tungsten-steel carbide milling cutters with 3.175 mm diameter and 17 mm length for compression cutting wood and board materials
- TypeRight-Angle Drills
- 5-piece set covers multiple CNC jobs
- 175 mm diameter suits fine wood routing
- 17 mm cutting length handles standard board thickness
- Up-down spiral geometry reduces tear-out on plywood
- Tungsten-steel carbide keeps edges sharp longer
Precision Wood Cutting Set
This five-piece carbide cutter set is built for CNC routing of wood, plywood, density board, solid wood and particleboard. The 3.175 mm shank fits compatible collets and the 17 mm cutting length suits typical stock thicknesses. Tungsten steel construction provides the hardness needed for clean edges in abrasive sheet goods. It is intended for workshop operators running automated milling jobs.
Compatibility Check
Verify that your CNC spindle or router accepts a 3.175 mm shank and that the tool holder can accommodate the overall cutter length. Confirm the machine’s maximum speed rating is appropriate for single-flute carbide tooling in the materials you process. The up-down spiral geometry requires a rigid gantry to prevent vibration during compression cuts. This set is not for hand-held drilling or metalworking applications.
Thermal And Power Behaviour
Carbide stays sharp longer than high-speed steel, reducing friction heat during extended profiling runs. The single flute design clears chips efficiently, helping to keep the cutting zone cool in dense board materials. Normal operation produces typical high-frequency routing noise; hearing protection is standard practice. Power draw depends entirely on the spindle motor and feed rates you select.
Highlights
- 5-piece set covers multiple CNC jobs
- 175 mm diameter suits fine wood routing
- 17 mm cutting length handles standard board thickness
- Up-down spiral geometry reduces tear-out on plywood
- Tungsten-steel carbide keeps edges sharp longer
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
What comes in the box and do I need anything else to use them?
The package contains five 3.175 mm diameter carbide cutters with a 17 mm cutting length. A compatible CNC router or spindle with a 3.175 mm collet is required but not included.
How do I choose between the available versions or capacities?
This listing offers a single specification: five one-flute up-down spiral cutters in 3.175 x 17 mm. No alternative diameters, flute counts or pack sizes are available here.
What does the 3.175 x 17 mm size mean when the tool is in my CNC machine?
The 3.175 mm shank fits standard 1/8 inch collets and the 17 mm flute length determines the maximum depth of cut per pass in wood, plywood or particleboard.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
