YINGHUA
YINGHUA 3.175×25×50mm Up Down Compound One Flute Carbide Mill Cutter
Single-flute carbide mill cutter with up-down compression geometry, 3.175 mm diameter, 25 mm cut length, 50 mm overall length for wood, acrylic, PVC and density board
- TypeRight-Angle Drills
- Cuts acrylic, PVC, density board and wood board
- Up-down compound flute compresses material for clean edges
- Single flute design clears chips efficiently at 3.175 mm diameter
- Tungsten steel carbide construction resists wear during routing
- 25 mm cutting length and 50 mm overall length suit CNC routers
YINGHUA carbide mill cutter for CNC routers
This new YINGHUA carbide mill cutter is a single-flute up-down compression bit built for CNC routing. The tool measures 3.175 mm in diameter with a 25 mm cutting length and 50 mm overall length. It is made from tungsten steel for hardness and wear resistance.
Suited for cutting acrylic, PVC.
The cutter is intended for industrial cutting on materials such as acrylic, PVC, density board and wood board. It is not for buyers who need multi-flute geometry for chip evacuation in deep pockets or for operators under 18 years of age.
Single-flute up-down compression geometry
The defining specification is the one-flute up-down compound spiral that produces a compression cut on both faces of the workpiece. This geometry decides whether the bit matches the required finish quality on the materials listed.
Highlights
- Cuts acrylic, PVC, density board and wood board
- Up-down compound flute compresses material for clean edges
- Single flute design clears chips efficiently at 3.175 mm diameter
- Tungsten steel carbide construction resists wear during routing
- 25 mm cutting length and 50 mm overall length suit CNC routers
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
Which shank and cutting-length combination does the 3.175×25×50 mm tool provide?
The cutter has a 3.175 mm shank diameter, 25 mm cutting length and 50 mm overall length, giving a single fixed specification for this listing.
What does the up-down compound flute achieve when the bit is running in a CNC router?
The opposing spiral flutes push chips both upward and downward, compressing the workpiece faces to reduce tear-out on acrylic, PVC, density board and wood board.
What shank standard does the 3.175 mm diameter follow for tool-holder compatibility?
The 3.175 mm shank matches the common 1/8-inch collet size used on many desktop CNC routers and rotary tools.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
