YINGHUA 2x6 HDMI KVM Switch 4K 30Hz 100M 4 UTP CAT6 AU Plug

2×6 HDMI KVM Switch for Multi-Display Setups

This YINGHUA switch routes two HDMI sources to six outputs, serving installers who need simultaneous local and extended displays. It suits control rooms, digital signage and multi-room AV where a single source must reach several screens. Buyers who only need simple two-to-one switching or who require HDMI 2.0 bandwidth will not find those features here.

CAT6 Extension and Loop-Out Integration

The unit provides two local HDMI loop-outs plus four RJ45 ports for CAT5e or CAT6 runs up to 100 metres. Each remote display requires a separate 4K RJ45 receiver, sold separately, so budget for up to four receivers if you use all extension ports. Without the receivers the four UTP ports remain inactive, leaving only the two local outputs usable.

4K 30 Hz Stability Over Long Cable Runs

Video carries at 4K 30 Hz or 1080p and lower resolutions across the full 100 to 120 metre CAT6 distance using HDMI 1.4 and HDCP 1.4 compliance. The extender architecture maintains signal integrity without the dropouts common in short-burst boosters, making it reliable for continuous playback in signage or monitoring roles.