We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black plastic fan bracket with two 3010 turbo fans and one hydraulic fan, air guide covers, and 3.3 ft cable

YINGHUA

YINGHUA 2 in 1 Out Dualhead Hotend Fan Bracket 12V 24V 3010 TurboFans 3.3 ft Cable

SKU CH-EWCD-41CEX

Dual-head hot-end bracket holds two 3010 turbo fans and one hydraulic fan, runs on 12 or 24 V, and includes a 3.3 ft extension cable

  • Dual-head cooling with two 3010 TurboFans and one hydraulic fan
  • Adjustable mounting height via four fan bracket holes
  • Compact, lightweight design improves heat dissipation and printer stability
  • Supports both 12 V and 24 V power inputs
  • Includes 3.3 ft extension cable for flexible wiring

Compatible Hotend Configuration

This fan bracket is designed for a 2 in 1 out dual-head hotend and includes two 3010 TurboFans plus one 3010 hydraulic fan. It comes with air guide covers and a screw set for assembly. The unit is compact and lightweight to aid heat dissipation.

Voltage and Cable Length

The fans operate on either 12 or 24 volt power and are supplied with an optional extension cable measuring approximately 3.3 ft. Four mounting holes allow height adjustment during installation.

Builders With Matching Dual Hotends

This bracket suits builders who already own the specific dual hotend it matches. Those using a different hotend design or a single extruder should verify dimensions before purchase.

Highlights

  • Dual-head cooling with two 3010 TurboFans and one hydraulic fan
  • Adjustable mounting height via four fan bracket holes
  • Compact, lightweight design improves heat dissipation and printer stability
  • Supports both 12 V and 24 V power inputs
  • Includes 3.3 ft extension cable for flexible wiring

Specifications

No published specifications for this item yet.

Questions about this item

How does the 3010 TurboFan rating translate to cooling a dual-head hotend?

Two 3010 TurboFans and one 3010 Hydraulic Fan push air through the included duct and guide covers, directing flow across both nozzle exits for balanced part cooling.

What do the 12 V and 24 V ratings mean for wiring the fans?

The fans accept either 12 V or 24 V supply; match the voltage to your printer’s fan header to avoid under- or over-driving the motors.

What mounting points and clearance does the bracket need on the carriage?

Four fan mounting holes allow height adjustment, and the compact bracket fits carriages that can accommodate the dual-fan duct and included screw set.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.