YINGHUA
YINGHUA 1piece Two Flutes Straight Slot End Milling Cutter 6X6X32X60
Carbide end mill with two straight flutes for CNC engraving and cutting wood, acrylic, PVC and other soft materials
- TypeRight-Angle Drills
- Precise CNC engraving with two-flute straight-slot design
- Durable tungsten-steel construction resists wear
- Cuts wood, acrylic, PVC, nylon and resin
- 32 mm cutting length for deeper passes
- Industrial-grade tool — not for users under 18
Right-Angle Drill End Mill
This right-angle drill end mill is a single tungsten-steel cutter built for CNC engraving and fine cutting. It targets hobbyists and light-industrial users who need a precise tool for wood, plywood, acrylic, PVC, nylon and resin. The two-flute straight-slot geometry gives a clean finish on softer materials.
6 mm Shank with 32 mm Cutting Length
The 6 mm shank fits standard collets while the 32 mm flute length provides reach for shallow pockets and profiling. It handles detailed engraving and light profiling comfortably but runs out of depth on thick stock or heavy roughing passes where longer flutes or higher chip clearance are required.
Industrial-Grade Tungsten Steel Construction
The solid tungsten-steel body resists wear longer than high-speed steel, keeping edges sharp through repeated passes on abrasive composites. No coatings, adapters or software are bundled; the cutter arrives ready to clamp and run on compatible CNC routers.
Highlights
- Precise CNC engraving with two-flute straight-slot design
- Durable tungsten-steel construction resists wear
- Cuts wood, acrylic, PVC, nylon and resin
- 32 mm cutting length for deeper passes
- Industrial-grade tool — not for users under 18
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
Will the 6 mm shank fit my older collet that only takes 6 mm tools?
Yes, the cutter has a 6 mm shank so it seats directly in any standard 6 mm collet without an adapter.
How can I confirm the two-flute geometry is cutting cleanly after I install it?
Run a test pass in wood or acrylic; a smooth edge with no chatter marks shows the two flutes are evacuating chips correctly.
Does the single-piece package include any collets, wrenches or extra cutters?
No, the box contains only the one 6x6x32x60 mm tungsten-steel end mill; collets and spanners must be sourced separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
