YINGHUA
YINGHUA 150M HDMI KVM Extender Matrix over IP Cat6 One-to-Many KVM Switch
Extends HDMI and USB control up to 150 m over Cat6, supports 1080p at 60 Hz and up to 99 devices via a network switch
- TypeHDMI
- Extends HDMI and USB up to 150 metres over a single Cat6 cable
- Supports 1920×1080p resolution at 60 Hz for crisp video
- One-to-many matrix distributes signals to up to 99 device groups
- KVM function enables remote keyboard and mouse control of source equipment
- IR receiver kit included for convenient remote-command pass-through
HDMI Matrix Over IP
This HDMI KVM extender matrix transmits video, audio and USB control over standard Cat6 cabling using Ethernet TCP/IP protocol. It supports one-to-many distribution through a network switch, letting a single source reach multiple displays or many sources share many screens. The system scales up to 99 device groups for flexible AV routing.
150m Extension with PoE
Signals travel up to 150 metres over a single Cat6 cable while Power over Ethernet supplies the receiver, reducing the need for local power outlets. Video resolution reaches 1920x1080P at 60Hz for smooth playback. The link handles HDMI audio and USB keyboard and mouse data simultaneously for remote KVM operation.
IR Remote and USB KVM
An included IR cable kit relays infrared commands back to the source device for convenient control. USB ports on the receiver pass keyboard and mouse signals to the connected computer or NVR. RJ45 connectors lock securely into the switch, and the EU plug powers the transmitter for immediate deployment.
Highlights
- Extends HDMI and USB up to 150 metres over a single Cat6 cable
- Supports 1920×1080p resolution at 60 Hz for crisp video
- One-to-many matrix distributes signals to up to 99 device groups
- KVM function enables remote keyboard and mouse control of source equipment
- IR receiver kit included for convenient remote-command pass-through
Specifications
| Type | HDMI |
|---|
Questions about this item
How do I connect the transmitter and receiver units using Cat6 cable for the 150m extension?
Link the TX and RX with a single Cat6 cable up to 150 metres; plug the HDMI source into the transmitter and the display into the receiver, then connect keyboard and mouse to the USB ports on the RX for remote control.
Does the IR receiver cable need periodic replacement or cleaning?
The kit includes an IR cable for remote-command passthrough; no scheduled replacement is mentioned, but keep the IR window free of dust so the signal stays reliable.
At what resolution and refresh rate does the video signal remain stable over the full 150m distance?
The extender supports up to 1920×1080 at 60 Hz across the full 150-metre Cat6 run; higher resolutions are not supported.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



