YINGHUA
YINGHUA 14x14x45x100MM HRC45 Altin Coated 4 Flutes Solid Carbide Roughing End Mill fastener
Solid carbide roughing end mill with Altin coating cuts aluminium, cast iron, steel, stainless steel and copper at HRC45 hardness
- TypeRight-Angle Drills
- HRC45 hardness suits hardened steel up to 45 HRC
- Altin coating reduces wear in high-temperature cutting
- Four-flute design improves chip evacuation during roughing
- Solid carbide construction resists deflection in deep slots
- 14 mm diameter with 100 mm overall length for extended reach
YINGHUA 4-Flute Roughing End Mill
This solid carbide end mill has a 14 mm cutting diameter and 100 mm overall length. The AlTiN coating and HRC45 substrate target roughing passes in aluminium, cast iron, steel, stainless steel and copper alloys. It suits CNC operators who need aggressive material removal in those metals.
Sustained roughing performance
The four-flute geometry and AlTiN coating work together to evacuate chips and resist heat during long cuts. Raw tungsten carbide substrate maintains edge integrity when the tool engages continuously in steel or stainless stock. The coating reduces built-up edge in aluminium and copper.
14 mm diameter decides fit
A 14 mm cutting diameter determines whether this tool matches your pocket or profile requirements. If the feature you are machining calls for a smaller or larger cutter, this end mill will not suit the operation.
Highlights
- HRC45 hardness suits hardened steel up to 45 HRC
- Altin coating reduces wear in high-temperature cutting
- Four-flute design improves chip evacuation during roughing
- Solid carbide construction resists deflection in deep slots
- 14 mm diameter with 100 mm overall length for extended reach
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
How much heat does the 14 mm carbide body generate during a full day of roughing steel?
The solid tungsten carbide and Altin coating run cooler than uncoated tools, but sustained heavy cuts in steel will still produce noticeable heat at the cutting zone.
What machine and holder are needed to run this 100 mm overall length end mill?
A CNC milling machine or router with a 14 mm collet or hydraulic chuck and enough Z-travel for the 100 mm shank length.
Will the 4-flute roughing profile work on an older manual knee mill?
Yes, provided the spindle can hold a 14 mm shank and deliver the feed rates the four-flute geometry expects for aluminum, cast iron or steel.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
