YINGHUA
YINGHUA 10Psc 6.35x25mm UP And DOWN Cut Two Flutes Spiral Carbide Mill Tool Cutters
A set of 10 tungsten steel spiral carbide cutters with up-and-down flutes for CNC routing wood, plywood and particleboard
- TypeRight-Angle Drills
- 10-piece carbide cutter set for CNC routing
- Up-cut and down-cut flutes compress wood fibres for clean edges
- Tungsten steel construction resists wear during heavy milling
- 35 mm shank fits standard CNC router collets
- Suitable for plywood, density board and solid wood
10-Piece Carbide Mill Cutter Set
This set supplies ten up-and-down cut spiral end mills designed for CNC router work. Each cutter measures 6.35 mm shank by 25 mm overall length and features two flutes ground from tungsten steel. The compression geometry reduces tear-out on both faces of the workpiece.
Tungsten Steel Construction for CNC Routing
The cutters mount directly into a standard 6.35 mm collet, requiring no adapters or special holders. Their right-angle drill type profile suits automated tool changers and fixed-spindle machines alike. The carbide material resists wear when profiling wood, plywood, density board, solid wood and particleboard.
Replaces Worn Single-Flute or Straight-Flute Bits
Shops switching from single-flute or straight-flute tooling gain cleaner edges and longer tool life on double-sided laminates. The upgrade is most noticeable when cutting veneered panels where top and bottom surface quality must match. Not suited for metal, plastic or non-wood composites.
Highlights
- 10-piece carbide cutter set for CNC routing
- Up-cut and down-cut flutes compress wood fibres for clean edges
- Tungsten steel construction resists wear during heavy milling
- 35 mm shank fits standard CNC router collets
- Suitable for plywood, density board and solid wood
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
How many cutters are in the pack?
The pack contains 10 tungsten-steel cutters with 6.35 mm shanks and 25 mm cutting length.
Do the carbide flutes generate much heat during long CNC runs?
Tungsten steel construction and the up-and-down flute geometry help clear chips efficiently, reducing heat build-up in wood and board materials.
What shank size must my CNC router collet accept?
Each cutter has a 6.35 mm shank, so the collet or tool holder must accommodate that diameter.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
