YINGHUA
YINGHUA 10pcs Two Flutes Straight Slot Bit Wood Cutter CNC Solid Carbide Router Bits 3.175X2X10X38
Ten tungsten-steel, two-flute router bits cut wood, acrylic, PVC, nylon, resin and plywood on CNC machines
- TypeRight-Angle Drills
- 10-piece set covers multiple routing tasks
- Tungsten steel construction resists wear during cutting
- Two-flute design clears chips for smoother finish
- 175 mm shank fits compatible CNC collets
- Suitable for wood, acrylic, PVC, nylon and resin
10-Piece Carbide Router Bit Set
This set contains ten solid carbide router bits with two straight flutes each. They are manufactured from tungsten steel for use in CNC machinery. The shank diameter is 3.175 mm and the overall length is 38 mm.
Suitable for Engraving and Fine Cutting
The bits are designed for engraving and cutting fine detail in acrylic, PVC, nylon, resin, wood and plywood. They are not intended for users under 18 years of age. Buyers needing bits for hazardous materials or heavy structural milling should look at other tooling.
Consistent Performance in Extended CNC Runs
Tungsten steel construction helps the cutting edges resist wear during sustained operation. The two-flute geometry clears chips efficiently to maintain cut quality over long jobs. The bits are supplied in a box of ten pieces for workshop readiness.
Highlights
- 10-piece set covers multiple routing tasks
- Tungsten steel construction resists wear during cutting
- Two-flute design clears chips for smoother finish
- 175 mm shank fits compatible CNC collets
- Suitable for wood, acrylic, PVC, nylon and resin
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
What shank size must my CNC collet accept for these 3.175 mm bits?
The shank diameter is 3.175 mm, so your collet or chuck must grip that exact size.
Can I run these 10 carbide cutters in a hand-held router that only takes 6 mm shanks?
No, the 3.175 mm shank will not fit a 6 mm collet; you need a matching 3.175 mm collet or adapter.
How do I verify the bits are cutting cleanly after installing them?
Check for smooth edges and minimal tear-out on a test piece of wood, plywood or acrylic.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
