YINGHUA
YINGHUA 10pcs Two Flutes Straight Slot Bit 3.175X3.175X22X45
Ten solid-carbide router bits with two flutes cut wood, acrylic, PVC, nylon, resin and plywood, supplied in a 10-piece box
- TypeRight-Angle Drills
- 10-piece set keeps spares ready for continuous CNC work
- Two-flute carbide design clears chips fast for smoother cuts
- Tungsten steel construction resists wear in abrasive materials
- 175 mm shank fits standard collets without adapters
- 22 mm cutting length handles deep passes in wood and plastic
10-piece carbide router bit set
This set supplies ten solid-carbide two-flute straight bits sized 3.175X3.175X22X45 for CNC routing. They are intended for engraving and cutting acrylic, PVC, nylon, resin, wood and plywood. The tungsten steel construction suits light industrial workshops and serious hobbyists who need repeatable cuts. Buyers who need larger diameters or different flute geometries should look elsewhere.
Sustained cutting performance
Tungsten steel holds its edge through extended passes in abrasive materials such as plywood and resin. The two-flute design clears chips continuously, reducing heat build-up during long runs. Cutting fine detail in acrylic or PVC remains consistent without frequent tool changes. The bits are not rated for hazardous or non-listed materials.
Installation and common issues
Each bit has a 3.175 mm shank that fits standard collets of that size; no adapters are included. Secure the collet firmly to prevent run-out, which is the main cause of premature wear. The blades are sharp and the product is restricted to users aged 18 and over. Improper feed rates or cutting unsupported materials often lead to chipping or breakage.
Highlights
- 10-piece set keeps spares ready for continuous CNC work
- Two-flute carbide design clears chips fast for smoother cuts
- Tungsten steel construction resists wear in abrasive materials
- 175 mm shank fits standard collets without adapters
- 22 mm cutting length handles deep passes in wood and plastic
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
How much heat or noise does the 3.175 mm shank generate during long CNC runs?
The solid carbide bits run cool and quiet in wood, acrylic, PVC, nylon, resin and plywood because the two-flute design clears chips efficiently, reducing friction and motor load.
What collet or chuck must I already have to hold the 3.175 mm shank?
You need a collet or chuck that accepts a 3.175 mm shank; the 10-piece set fits standard CNC routers and engraving spindles with that bore size.
Will these 22 mm cutting-length bits work on the same materials as my older high-speed steel router bits?
Yes, they cut the same materials — wood, plywood, acrylic, PVC, nylon and resin — but the tungsten steel stays sharp longer, giving cleaner edges on fine engraving jobs.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
