YINGHUA
YINGHUA 10pcs Two Flutes Straight Slot Bit 10x10x62x100
A set of ten solid-carbide two-flute straight bits for CNC routing and engraving wood, acrylic, PVC and similar materials
- TypeRight-Angle Drills
- Ten-piece set keeps spares on hand for continuous CNC work
- Two-flute design clears chips efficiently for smoother cuts
- Solid tungsten steel resists wear on abrasive materials
- 62 mm cutting length handles deep profiles in one pass
- 100 mm overall length fits standard collets without adapters
YINGHUA 10pcs Carbide Router Bit Set
This set contains ten solid carbide two-flute straight bits designed for CNC routing applications. The tungsten steel construction provides hardness for clean cuts in wood, plywood, acrylic, PVC, nylon and resin. Each bit measures 10x10x62x100 and is supplied in a single box. The product is new and intended for industrial cutting use only.
Sustained Cutting Performance in CNC Work
The solid carbide material maintains sharpness during extended milling sessions better than high-speed steel alternatives. Two flutes evacuate chips efficiently to reduce heat buildup when profiling or slotting dense materials. Consistent feed rates are achievable across the listed substrates without frequent tool changes. The bits are not rated for hazardous article processing.
Shank Diameter and Machine Compatibility
A 10 mm shank diameter fits collets and tool holders sized to that standard. Builders using machines with smaller or larger collet systems cannot mount these bits without adapters. The 62 mm cutting length limits maximum depth of cut in a single pass. Users requiring longer reach or different flute geometries must source alternative tooling.
Highlights
- Ten-piece set keeps spares on hand for continuous CNC work
- Two-flute design clears chips efficiently for smoother cuts
- Solid tungsten steel resists wear on abrasive materials
- 62 mm cutting length handles deep profiles in one pass
- 100 mm overall length fits standard collets without adapters
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
How much heat builds up when the 10 mm tungsten-steel bit runs all day in a CNC router?
Tungsten steel dissipates heat efficiently; with two flutes clearing chips, the bit stays cool enough for continuous engraving on acrylic, PVC, nylon, resin, wood or plywood.
What shank size must my CNC collet accept for these 10x10x62x100 bits?
The shank diameter is 10 mm, so your machine needs a 10 mm collet or compatible adapter to hold each bit securely.
Will these carbide bits fit the older 6 mm collet on my bench-top router?
No — the shank is 10 mm, so they require a 10 mm collet; a 6 mm collet cannot grip them.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
