YINGHUA
YINGHUA 10pcs Two Flute Straight Slot CNC Router Bits 3.175X32X55
Ten-piece tungsten-steel CNC router bit set with 3.175 mm shanks, 32 mm cutting length and 55 mm overall length for engraving wood, acrylic, PVC, nylon, resin and plywood
- TypeRight-Angle Drills
- 10-piece carbide set keeps spares ready for continuous CNC work
- Tungsten-steel construction resists wear during long cutting sessions
- Two-flute straight geometry clears chips cleanly in wood and plastics
- 175 mm shank fits standard collets without adapters
- 32 mm cut length and 55 mm overall reach suit deep pockets
10-Piece Solid Carbide Router Bit Set
This 10-piece set provides solid carbide two-flute straight bits for CNC routing work. The cutters are made from tungsten steel and suit engraving or cutting tasks on acrylic, PVC, nylon, resin, wood and plywood. They are intended for industrial cutting use only and are not for anyone under 18 years of age.
3.175 mm Cutting Diameter With 32 mm Flute Length
Each bit has a 3.175 mm cutting diameter and a 32 mm flute length within a 55 mm overall length. The straight two-flute geometry gives clean slots in the listed materials, while the solid carbide construction resists wear during repeated passes. The dimensions limit the set to shallow or medium-depth slots rather than deep pocketing.
Replaces Worn Straight Bits In CNC Machines
The pack directly replaces dull or damaged straight-flute bits of the same 3.175 mm diameter and 32 mm flute length. The jump is worth it when cut quality drops or when a fresh set of ten reduces downtime on production runs. It does not suit profiles that require ball-nose, V-groove or compression geometries.
Highlights
- 10-piece carbide set keeps spares ready for continuous CNC work
- Tungsten-steel construction resists wear during long cutting sessions
- Two-flute straight geometry clears chips cleanly in wood and plastics
- 175 mm shank fits standard collets without adapters
- 32 mm cut length and 55 mm overall reach suit deep pockets
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
Will the 3.175 mm shank fit the collet on my older CNC router?
The bits have a 3.175 mm shank diameter; verify your collet size matches before use.
How can I confirm the tungsten steel cutters are cutting cleanly after installation?
Run a test cut in scrap wood or acrylic; smooth edges and consistent chip load show the 32 mm cutting length is engaged correctly.
Does the box contain only the ten router bits or are collets and wrenches included?
The package includes a box of 10 pieces; collets, wrenches or other accessories must be purchased separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
