YINGHUA
YINGHUA 10Pcs 6x32mm UP DOWN Cut Carbide Mill Tool Cutters
Set of ten up-and-down cut carbide end mills for CNC routing wood and composite panels
- TypeRight-Angle Drills
- 10-piece set equips your CNC router for multiple jobs
- Up-down compression flutes cut wood cleanly on both faces
- Tungsten-steel carbide stays sharp through dense board
- Two-flute spiral clears chips for smoother finish
- Suited for plywood, particleboard and solid wood
10-Piece Tungsten Steel Router Bits
This set contains ten compression spiral end mills made from tungsten steel. They are designed for use in CNC routers and deliver clean up-cut and down-cut action in a single tool. The two-flute geometry helps evacuate chips while maintaining a smooth finish on both faces of the workpiece. Supplied as a new 10-piece pack ready for workshop use.
Woodworkers needing double-sided chip-free cuts
These cutters suit cabinet makers, sign makers and joiners who process plywood, MDF, particleboard and solid wood and require tear-out-free edges on top and bottom surfaces. They are not intended for metal, plastic or abrasive composite machining. Buyers who need single-direction up-cut or down-cut only, or who require larger shank diameters for heavy industrial spindles, should look at alternative tooling.
6 mm shank with 32 mm cutting length
The critical specification is the 6 mm shank diameter paired with a 32 mm flute length, which determines collet compatibility and maximum depth of cut in a single pass. Verify your machine’s collet size and Z-travel before purchasing.
Highlights
- 10-piece set equips your CNC router for multiple jobs
- Up-down compression flutes cut wood cleanly on both faces
- Tungsten-steel carbide stays sharp through dense board
- Two-flute spiral clears chips for smoother finish
- Suited for plywood, particleboard and solid wood
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
How often will the tungsten-steel cutting edges need replacement when routing wood and plywood?
The 10-piece set provides multiple fresh cutters so you can swap a dull one without downtime; tungsten steel holds an edge longer than standard steel but exact life depends on feed rate and material density.
What limits continuous cutting time before the shank or flutes overheat?
The 6 mm shank and 32 mm flute length dissipate heat only through the workpiece and spindle; sustained heavy cuts in dense board will raise temperature first at the cutting zone, so pause to let the tool cool.
How much noise and heat does the up-down spiral generate during all-day CNC routing?
The compression geometry reduces tear-out and vibration, lowering acoustic output compared with single-direction bits; heat builds in the cut rather than the motor, so spindle temperature stays manageable with proper chip evacuation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
