YINGHUA
YINGHUA 10Pcs 6X22mm DLC UP And DOWN Cut Two Flutes Spiral Carbide Mill Tool Cutters
Ten-piece set of 6x22mm DLC-coated tungsten-steel cutters with up-and-down flutes for clean CNC routing of wood and composite boards
- TypeRight-Angle Drills
- 10-piece set covers multiple CNC routing jobs
- DLC coating extends cutter life in abrasive materials
- Up-and-down compression flutes prevent tear-out on both faces
- Two-flute spiral geometry clears chips efficiently in wood
- Tungsten steel construction resists wear during prolonged cutting
10-piece DLC-coated carbide mill cutter set
This 10-piece set provides tungsten steel spiral cutters with a 6 mm shank and 22 mm cutting length. The up-and-down compression geometry suits CNC router operators who need clean edges on both faces of sheet material. Each tool is new and intended for industrial cutting only.
Two-flute compression design for wood and composites
The opposing helix pulls chips toward the centre, reducing tear-out on the top and bottom surfaces of plywood, density board, solid wood and particleboard. Ten cutters give enough stock for batch work, though the fixed 22 mm flute depth limits maximum single-pass thickness. Users requiring deeper cuts or different diameters will need additional tooling.
DLC coating on tungsten steel substrate
Diamond-like carbon coating lowers friction and resists abrasive wear when machining abrasive wood-based panels. The coating extends tool life compared with uncoated carbide, but the set contains only the 6×22 mm size; shops that run multiple diameters must source other sizes separately.
Highlights
- 10-piece set covers multiple CNC routing jobs
- DLC coating extends cutter life in abrasive materials
- Up-and-down compression flutes prevent tear-out on both faces
- Two-flute spiral geometry clears chips efficiently in wood
- Tungsten steel construction resists wear during prolonged cutting
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
Will the 6 mm shank fit my existing CNC router collet?
The 6X22 mm shank diameter matches standard 6 mm collets used on many CNC routers, so the cutters should seat without an adapter.
How do I verify the up-cut and down-cut geometry is cutting cleanly?
Run a test pocket in scrap plywood; clean edges on both top and bottom faces confirm the compression spirals are shearing correctly.
Are the ten cutters the only items in the package?
The box contains exactly 10 pieces of the 6X22 mm DLC-coated carbide cutters; no collets, wrenches or additional hardware are included.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
