YINGHUA
YINGHUA 10Pcs 6x17mm UP And DOWN Cut Two Flutes Spiral Carbide Mill Tool Cutters
Ten tungsten-steel compression cutters for clean CNC routing of wood and board materials
- TypeRight-Angle Drills
- 10-piece set provides ample cutters for extended CNC routing work
- Up-and-down cut geometry compresses wood fibres for clean edges on both faces
- Two-flute spiral design evacuates chips efficiently during high-speed milling
- Tungsten steel construction resists wear when cutting plywood, density board and solid wood
- 17 mm cutting length suits a range of woodworking material thicknesses
10-Piece Carbide Router Bits for CNC Woodworking
This set contains ten tungsten-steel compression cutters designed for CNC router tables. They are aimed at hobbyists and small-shop operators who cut sheet goods such as plywood, MDF, particleboard and solid wood. The up-and-down flute geometry reduces tear-out on both faces of the workpiece. Not suitable for metal, plastic or hand-held routing applications.
6 mm Shank with 17 mm Cutting Length
Each cutter has a 6 mm shank diameter and a 17 mm flute length, so the machine collet must accept 6 mm shanks and the programmed cut depth must not exceed 17 mm. The right-hand spiral, two-flute design requires a spindle that rotates clockwise. Buyers whose collets are 1/4 inch or 8 mm, or who need longer reach, cannot use these bits without adapters or different tooling.
Direct Collet Fit — Check Rotation and Depth
Installation is a simple collet change: insert the 6 mm shank fully, tighten securely and verify clockwise rotation before cutting. The most common errors are running the spindle counter-clockwise, which snaps the carbide, and setting a pass deeper than 17 mm, which causes deflection and poor finish. Keep the tool away from anyone under 18 years old.
Highlights
- 10-piece set provides ample cutters for extended CNC routing work
- Up-and-down cut geometry compresses wood fibres for clean edges on both faces
- Two-flute spiral design evacuates chips efficiently during high-speed milling
- Tungsten steel construction resists wear when cutting plywood, density board and solid wood
- 17 mm cutting length suits a range of woodworking material thicknesses
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
What does the 17 mm cutting length allow in a single pass?
The 17 mm flute length lets the tool cut grooves or profiles up to that depth without needing multiple step-downs in wood, plywood or particleboard.
How does the up-and-down flute geometry affect the cut?
The opposing spirals push chips both upward and downward, compressing the material to give clean top and bottom edges on double-sided boards.
What shank size must the collet or holder accept?
Each cutter has a 6 mm shank, so the machine’s collet or chuck must grip that diameter.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
