YINGHUA
YINGHUA 10Pcs 4x22mm UP And DOWN Cut 2 Flutes Blue Nano Coating Carbide Mill Tool Cutters
Set of ten carbide cutters with up-and-down flutes for clean CNC routing of wood, plywood and particleboard
- TypeRight-Angle Drills
- 10-piece set covers multiple CNC jobs
- Up-and-down compression cut prevents tear-out on both faces
- Blue nano coating reduces friction and heat build-up
- Tungsten steel construction resists wear in abrasive woods
- Suitable for plywood, density board, solid wood and particleboard
10-piece carbide milling set for CNC routers
This set contains ten 4 mm by 22 mm up-and-down cut carbide end mills with a blue nano coating. The two-flute compression geometry is designed for clean edges on both faces of the workpiece. They are intended for CNC routing of wood, plywood, density board, solid wood and particleboard.
Check shank diameter and machine compatibility
Verify that your CNC router accepts a 4 mm shank and that the 22 mm cutting length suits your material thickness. The tools are rated for industrial cutting only and must not be used by anyone under 18 years of age. Confirm the collet or holder size matches before ordering.
Tungsten steel construction with nano coating
The tungsten steel body and blue nano coating reduce friction and heat build-up during extended cutting passes. Compression geometry helps evacuate chips efficiently, keeping the cutting zone cooler. Normal use on listed wood materials produces manageable noise and power draw for standard CNC spindles.
Highlights
- 10-piece set covers multiple CNC jobs
- Up-and-down compression cut prevents tear-out on both faces
- Blue nano coating reduces friction and heat build-up
- Tungsten steel construction resists wear in abrasive woods
- Suitable for plywood, density board, solid wood and particleboard
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
What comes in the 10-piece set and is any extra hardware required?
The box contains ten 4 x 22 mm up-and-down cut, two-flute carbide end mills with blue nano coating. No additional collets, holders or fasteners are mentioned.
How do I decide between the listed versions or capacities for these cutters?
Only one specification is offered: ten cutters at 4 mm shank diameter and 22 mm cutting length. There are no alternative sizes or flute counts to choose from.
What does the 22 mm cutting length mean when the tool is running in a CNC router?
It allows a single pass depth of up to 22 mm in wood, plywood, density board, solid wood or particleboard when the machine rigidity and feed rates are suitable.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
