YINGHUA
YINGHUA 10Pcs 4x17mm UP DOWN Cut 2 Flutes Blue Nano Coating Carbide Mill Tool Cutters
A 10-piece set of 4x17 mm up-down cut carbide end mills with blue nano coating for CNC routing wood and composite boards
- TypeRight-Angle Drills
- 10-piece set keeps spares ready for continuous CNC routing
- Up-and-down flute geometry compresses chips for clean edges in wood
- Blue nano coating reduces friction and extends cutter life
- Tungsten steel construction handles plywood, solid wood and particleboard
- 4 mm diameter with 17 mm cutting length fits standard router collets
10-piece carbide milling set for CNC routers
This set contains ten 4×17 mm up-and-down cut carbide mill cutters with a blue nano coating. They are made from tungsten steel for high construction strength and precise cutting in CNC machinery. The tools are supplied new and intended for industrial cutting applications only.
Up-and-down cut geometry prevents tear-out
The up-and-down flute design shears material from both directions, giving clean edges on wood, plywood, density board, solid wood and particleboard without splintering the top or bottom surface. Two flutes on each cutter provide a balance of chip clearance and finish quality for compression milling tasks.
Carbide construction handles abrasive sheet goods
Tungsten steel carbide resists wear when cutting dense or abrasive composite boards, keeping cutting edges sharp longer than high-speed steel alternatives. The blue nano coating further reduces friction and heat buildup during extended routing passes. Not for use by persons under 18 years.
Highlights
- 10-piece set keeps spares ready for continuous CNC routing
- Up-and-down flute geometry compresses chips for clean edges in wood
- Blue nano coating reduces friction and extends cutter life
- Tungsten steel construction handles plywood, solid wood and particleboard
- 4 mm diameter with 17 mm cutting length fits standard router collets
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
How does the 4x17 mm size affect cutting depth in a CNC router?
The 17 mm cutting length limits the maximum depth of cut in a single pass to 17 mm when routing wood, plywood or density board.
What does the up-down cut geometry do for chip evacuation?
The opposing flutes push chips both upward and downward, compressing the material to reduce tear-out on both faces of the workpiece.
What shank size fits the 4 mm diameter of these cutters?
The 4 mm shank matches a 4 mm collet or equivalent holder used on many CNC routers.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
