YINGHUA
YINGHUA 10Pcs 4x17mm UP And DOWN Cut 2 Flutes Colorful Coating Carbide Mill Tool Cutters
Ten carbide milling cutters with up-and-down flutes cut wood and board cleanly on CNC routers
- TypeRight-Angle Drills
- 10-piece set covers multiple CNC jobs
- Up-and-down cut prevents tear-out on both faces
- Two-flute design clears chips for smooth cuts
- Colorful coating reduces friction and extends life
- Tungsten steel construction handles wood and composites
10-piece carbide mill cutter set for CNC routers
This set contains ten 4x17mm up-and-down cut milling cutters with a colourful coating. They are made from tungsten steel for hardness and wear resistance. The two-flute compression geometry suits CNC router work on wood-based materials. The pack is intended for professional or workshop use.
Compression geometry limits tear-out
The up-and-down flute design shears the top layer downward and the bottom layer upward to reduce splintering on veneered or laminated panels. Cutting performance depends on the CNC machine rigidity and feed-rate settings. The tools are specified for wood, plywood, density board, solid wood and particleboard only. They are not rated for metal, composites or hazardous materials.
Simple collet mounting but strict safety rules apply
Each cutter fits a standard collet matching the 4 mm shank; no special holders are required. The coating helps identify used edges during tool changes. Safety instructions prohibit use by anyone under 18 years old and restrict the cutters to industrial cutting applications. Incorrect feeds or dull edges will degrade finish quality quickly.
Highlights
- 10-piece set covers multiple CNC jobs
- Up-and-down cut prevents tear-out on both faces
- Two-flute design clears chips for smooth cuts
- Colorful coating reduces friction and extends life
- Tungsten steel construction handles wood and composites
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
Should I pick the 10-piece set or look for a different quantity?
The package contains exactly 10 cutters, each 4 mm in diameter with a 17 mm cutting length, so the set size is fixed at 10 pieces.
What does the up-and-down compression geometry actually do in the cut?
The opposing flutes push chips upward and downward at the same time, giving clean edges on both faces of wood, plywood, density board, solid wood and particleboard.
What shank standard do these 4 mm cutters follow for my CNC router?
They use a plain 4 mm cylindrical shank that fits standard collet chucks on hobby and light-industrial CNC routers.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
