YINGHUA
YINGHUA 10Pcs 4x17mm DLC UP And DOWN Cut Two Flutes Spiral Carbide Mill Tool Cutters
Set of ten 4×17 mm DLC-coated carbide end mills with up-cut and down-cut flutes for clean CNC routing of wood, plywood and composite boards
- TypeRight-Angle Drills
- 10-piece set covers multiple jobs with one purchase
- DLC coating resists wear for longer cutting life
- Up-and-down compression flutes prevent tear-out on both faces
- Two-flute carbide design clears chips efficiently in wood
- Tungsten steel construction handles plywood, particleboard and solid wood
CNC Compression Cutters For Woodworking
This ten-piece set of tungsten-steel spiral cutters is built for CNC router tables. The up-and-down flute geometry compresses material fibres to reduce tear-out on both faces of the workpiece. Each cutter measures 4 by 17 millimetres and carries a DLC coating for extended edge life.
Verify Shank Fit And Machine Rigidity
Confirm that your router collet accepts a 4 millimetre shank before ordering. The compression profile demands a rigid gantry and secure work-holding to prevent vibration during full-depth passes. These tools are rated for industrial cutting only and must not be used by anyone under 18 years of age.
Replaces Worn Single-Direction Bits
Swap out dull straight-flute or single-spiral bits when edge quality on plywood, particleboard or solid wood begins to degrade. The dual-flute action clears chips efficiently while shearing top and bottom surfaces cleanly, making the upgrade worthwhile for high-volume panel processing.
Highlights
- 10-piece set covers multiple jobs with one purchase
- DLC coating resists wear for longer cutting life
- Up-and-down compression flutes prevent tear-out on both faces
- Two-flute carbide design clears chips efficiently in wood
- Tungsten steel construction handles plywood, particleboard and solid wood
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
What comes in the box and what else do I need to use these cutters?
The box contains ten 4×17 mm DLC-coated compression cutters; you will need a CNC router with a 4 mm collet or adapter to hold the 4 mm shank.
The listing shows only one size — 4×17 mm — so how do I know it is the right choice?
Choose this 4×17 mm set when your CNC takes a 4 mm shank and you need a 17 mm cutting length for wood, plywood, density board or particleboard.
What does the UP and DOWN cut geometry actually do on the machine?
The up-cut flutes pull chips upward while the down-cut flutes press the top surface down, giving clean edges on both faces of the workpiece.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
