YINGHUA
YINGHUA 10Pcs 3.175x22mm Up Down Cut 2 Flutes Colorful Coating Carbide Mill Tool Cutters
Set of ten 3.175 mm carbide end mills with up-down cut geometry for clean CNC routing of wood and composite boards
- TypeRight-Angle Drills
- 10-piece set covers multiple CNC routing jobs
- Up-down cut geometry reduces tear-out on wood and plywood
- Two-flute design clears chips efficiently during operation
- Tungsten steel construction resists wear on dense materials
- Colorful coating aids quick tool identification in the workshop
YINGHUA 10-Piece Carbide End Mill Set
This YINGHUA set supplies ten tungsten-steel cutters for CNC routers. Each tool measures 3.175 mm shank diameter by 22 mm overall length and features a two-flute up-and-down compression geometry. The colourful coating reduces friction and extends edge life during repetitive routing passes. They are sold new and ready for workshop use.
Woodworkers cutting plywood.
These cutters suit hobbyists and small-shop operators who need clean edges on sheet goods without separate roughing and finishing passes. They are not suited for metal, stone or abrasive composite machining. Buyers requiring larger shank diameters or higher flute counts should consider other tooling.
3.175 mm shank diameter fits matching collets
The 3.175 mm shank is the critical fit dimension; verify your router collet accepts this exact size before purchasing. A mismatch will prevent secure clamping and cause runout or tool loss. The ten-piece pack provides spare cutters for high-volume production runs.
Highlights
- 10-piece set covers multiple CNC routing jobs
- Up-down cut geometry reduces tear-out on wood and plywood
- Two-flute design clears chips efficiently during operation
- Tungsten steel construction resists wear on dense materials
- Colorful coating aids quick tool identification in the workshop
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
What shank diameter does the 3.175 mm end mill need in a collet or chuck?
The cutter has a 3.175 mm shank, so the holder must accept that exact diameter.
What overall length must the tool clearance accommodate for the 22 mm cutters?
Each cutter measures 22 mm in total length, so the spindle and workpiece gap must allow at least that much reach.
How should the 10-piece carbide set be secured before starting a CNC routing job?
Tighten the collet firmly around the 3.175 mm shank, verify the tool is seated flush, and confirm rotation direction matches the up-down flute design before cutting.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
