YINGHUA
YINGHUA 10Pcs 3.175x22mm Blue UP And DOWN Cut Two Flutes Spiral Carbide Mill Tool Cutters
Set of ten tungsten-steel compression cutters with up-and-down flutes for clean CNC routing of wood and composite boards
- TypeRight-Angle Drills
- 10-piece set keeps spares ready for continuous CNC work
- Tungsten steel construction resists wear for longer tool life
- Up-and-down cut geometry produces clean edges on both faces
- Two-flute spiral design clears chips efficiently during routing
- Suitable for wood, plywood, density board, solid wood and particleboard
10-Piece Carbide Cutter Set
This set contains ten spiral carbide mill tool cutters designed for CNC router use. Each cutter measures 3.175 by 22 millimetres and features a blue coating. The up-and-down cut geometry with two flutes provides compression cutting action for clean edges on both faces.
Woodworkers needing compression cuts
These cutters suit operators machining wood, plywood, density board, solid wood and particleboard on CNC equipment. The tools are rated for industrial cutting only and must not be used by anyone under 18 years of age. Buyers requiring different shank diameters or flute counts should look at other options.
3.175 mm shank diameter
The shank diameter of 3.175 millimetres determines collet compatibility and must match the CNC router holder exactly. Verify this dimension against your machine specifications before purchase.
Highlights
- 10-piece set keeps spares ready for continuous CNC work
- Tungsten steel construction resists wear for longer tool life
- Up-and-down cut geometry produces clean edges on both faces
- Two-flute spiral design clears chips efficiently during routing
- Suitable for wood, plywood, density board, solid wood and particleboard
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
What shank diameter does the 3.175 mm carbide cutter need in a collet or chuck?
The shank is 3.175 mm, so it fits a matching 3.175 mm (1/8-inch) collet or chuck on your CNC router.
What is the overall length that must clear the tool holder and workpiece?
Each cutter is 22 mm long overall; allow that much clearance between the collet face and the material surface.
How do you install the 10-piece set so the up-cut and down-cut flutes both engage correctly?
Insert the tool fully into the collet, tighten securely, then verify rotation direction matches the spiral so both up-cut and down-cut edges shear the wood cleanly.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
