YINGHUA
YINGHUA 10Pcs 3.175x17mm UP DOWN Cut Carbide End Mill Cutter
Ten 3.175 mm two-flute carbide compression cutters for clean CNC routing of wood and board
- TypeRight-Angle Drills
- 10-piece set covers multiple CNC jobs
- 175 mm diameter for fine detail routing
- 17 mm cutting length handles thicker stock
- Up-down compression flutes prevent tear-out on both faces
- Tungsten steel construction resists wear in wood and composites
10-Piece Carbide End Mill Set
This set contains ten carbide end mills built for CNC router work. Each cutter measures 3.175 mm in diameter with a 17 mm cutting length. The two-flute up-and-down spiral geometry produces clean edges on both faces of the workpiece. Tungsten steel construction gives the tools hardness and wear resistance for repeated use.
Woodworkers needing compression cuts; not for metal
These cutters suit cabinet makers, sign makers and hobbyists who cut wood, plywood, density board, solid wood or particleboard on a CNC router. The compression action prevents tear-out on top and bottom surfaces. They are not intended for machining metal, stone or other abrasive materials that would dull the carbide quickly.
3.175 mm shank diameter decides fit
The 3.175 mm shank must match the collet or tool holder on your CNC spindle. If your machine uses a different shank size such as 6 mm or 1/4 inch these cutters will not seat correctly. Verify the shank specification before purchasing to avoid fitment issues.
Highlights
- 10-piece set covers multiple CNC jobs
- 175 mm diameter for fine detail routing
- 17 mm cutting length handles thicker stock
- Up-down compression flutes prevent tear-out on both faces
- Tungsten steel construction resists wear in wood and composites
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
Will the 3.175 mm shank on these 10 cutters fit the collet I already use on my CNC router?
The shank diameter is 3.175 mm. Check your collet specification; it must accept that exact shank size for a secure hold.
How can I confirm the up-cut and down-cut flutes are cutting cleanly after I install the cutters?
Run a test cut in scrap wood or plywood. Clean edges on both the top and bottom faces show the compression geometry is working as intended.
Does the package contain only the 10 carbide end mills, or are collets or collet nuts included?
The box includes 10 pieces of the 3.175×17 mm two-flute spiral cutters. Collets, nuts or any other accessories are not supplied and must be purchased separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
