YINGHUA
YINGHUA 10Pcs 3.175x17mm UP And DOWN Cut 2 Flutes Colorful Coating Carbide Mill Tool Cutters
Ten tungsten-steel compression cutters with colourful coating, 3.175 by 17 mm two-flute up-and-down design for CNC routing wood and board materials
- TypeRight-Angle Drills
- 10-piece set covers multiple CNC routing jobs
- 175 mm shank fits standard collets without adapters
- 17 mm cutting length handles thick wood stock cleanly
- Up-and-down compression flutes prevent tear-out on both faces
- Tungsten steel construction resists wear in abrasive materials
10-piece carbide router bit set
This 10-piece carbide milling cutter set is designed for CNC router users who need reliable compression cutting in wood materials. The tungsten steel construction supports clean edge quality on plywood, density board, solid wood and particleboard. Each bit features a 3.175 mm shank and 17 mm cutting length with a two-flute up-and-down geometry. The colorful coating helps identify the tools in a busy workshop.
Straightforward bit changes on standard collets
Installation is a simple collet swap on any CNC router that accepts a 3.175 mm shank. The right-angle drill style seats quickly and runs true when the collet is clean and properly tightened. The most common issue is chip packing in deep slots; use adequate dust extraction and appropriate feed rates to keep flutes clear. The coating resists buildup but does not eliminate the need for proper chip evacuation.
Verify shank size and material compatibility
Before ordering, confirm your CNC router’s collet or chuck accepts a 3.175 mm shank. The bits are intended for wood, plywood, density board, solid wood and particleboard only. They are not rated for metal, stone or hazardous materials. The set includes 10 identical cutters; buyers needing different diameters or flute counts should look elsewhere. Users must be 18 years or older.
Highlights
- 10-piece set covers multiple CNC routing jobs
- 175 mm shank fits standard collets without adapters
- 17 mm cutting length handles thick wood stock cleanly
- Up-and-down compression flutes prevent tear-out on both faces
- Tungsten steel construction resists wear in abrasive materials
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
How can I verify the cutters are performing correctly after installation?
Run a test cut in wood, plywood or particleboard; the up-and-down flute design should leave clean edges on both faces without tear-out.
What does the 10-piece set contain and what extra items are needed?
The box includes ten 3.175 mm shank carbide cutters with 17 mm cutting length; you must supply a compatible collet and tool holder for your CNC router spindle.
Which version should I choose for general wood and board cutting?
This single specification — 3.175 mm shank, 17 mm flute length, two-flute up-and-down compression geometry — is suited for wood, plywood, density board, solid wood and particleboard.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
