YINGHUA
YINGHUA 10Pcs 3.175x15mm UP DOWN Cut Carbide Mill Cutter
Set of 10 tungsten-steel up/down-cut carbide mill cutters sized 3.175x15mm for CNC routing wood and composite boards
- TypeRight-Angle Drills
- 10-piece set provides ample cutters for CNC routing projects
- 175 mm shank fits standard collets on many routers
- Up-and-down compression flutes reduce tear-out on wood and board
- Tungsten steel construction resists wear during prolonged cutting
- Two-flute spiral geometry clears chips efficiently in solid wood
CNC Compression Cutters
This set contains ten solid carbide end mills sized 3.175 mm by 15 mm for CNC routers. The up-down spiral geometry produces clean edges on both faces of the workpiece. They are intended for wood, plywood, density board, solid wood and particleboard. The tools are not for use by anyone under 18 years old.
Tungsten Steel Material
Each cutter is made from tungsten steel for hardness and wear resistance during routing operations. The two-flute up-down design shears fibres upward and downward simultaneously, reducing tear-out on laminated sheets. The set supplies ten identical cutters so a dull tool can be swapped quickly without interrupting a job.
Installation Notes
The cutters fit standard collets that accept a 3.175 mm shank; verify your router collet size before mounting. Overtightening the collet can crack the carbide, while excessive feed rates may chip the cutting edges. The tools are for industrial cutting only and must not be used on hazardous materials.
Highlights
- 10-piece set provides ample cutters for CNC routing projects
- 175 mm shank fits standard collets on many routers
- Up-and-down compression flutes reduce tear-out on wood and board
- Tungsten steel construction resists wear during prolonged cutting
- Two-flute spiral geometry clears chips efficiently in solid wood
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
How often will the 3.175mm tungsten steel cutters need replacing when cutting plywood?
Tungsten steel edges stay sharp longer than standard steel, but replacement depends on total cutting time and feed rate; inspect flutes regularly for chipping.
What limits continuous routing with these 15mm compression end mills?
Heat buildup in the two-flute carbide body is the first limit; allow cool-down periods during long passes to avoid edge degradation.
How much noise and heat do the 10-piece router bits generate during all-day CNC work?
Expect typical high-speed router whine and moderate heat at the shank; use dust extraction and spindle pauses to manage temperature.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
