YINGHUA
YINGHUA 10Pcs 3.175x12mm UP And DOWN Cut Two Flutes Spiral Carbide Mill Tool Cutters
Ten carbide compression cutters, 3.175 by 12 mm, for clean CNC routing of wood, plywood and particleboard
- TypeRight-Angle Drills
- 10-piece set keeps production running without interruption
- Up-and-down cut geometry reduces tear-out on both faces
- Two-flute spiral design clears chips efficiently for smoother finish
- Tungsten steel construction resists wear for longer tool life
- 175 mm shank fits standard CNC router collets
10-Piece Carbide Milling Cutter Set
This set contains ten tungsten-steel cutters sized 3.175 x 12 mm with an up-and-down two-flute spiral geometry. They are designed for CNC router compression cutting of wood, plywood, density board, solid wood and particleboard. The right-angle drill format suits compatible CNC machinery.
For CNC Woodworking Shops
The cutters suit operators who need a multi-pack for batch work on the listed sheet materials. They are not intended for hand-held routing, metal cutting or use by anyone under 18 years old. Buyers requiring single-flute or straight-flute profiles should look at other tooling.
3.175 mm Shank Diameter
The 3.175 mm shank determines collet compatibility and must match the holder specification of the CNC router. Verify this dimension against the machine collet before purchase to ensure a secure fit.
Highlights
- 10-piece set keeps production running without interruption
- Up-and-down cut geometry reduces tear-out on both faces
- Two-flute spiral design clears chips efficiently for smoother finish
- Tungsten steel construction resists wear for longer tool life
- 175 mm shank fits standard CNC router collets
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
How much heat do the 3.175x12mm tungsten steel cutters generate during continuous CNC routing?
The carbide material resists heat buildup, but sustained cutting speed and feed rate determine temperature rise. Use appropriate coolant or air blast for long sessions.
What collet or holder size is required for the 3.175mm shank on these compression end mills?
A 3.175mm (1/8 inch) ER collet or compatible shrink-fit holder is needed to secure the shank in your CNC router spindle.
Will these up-down cut flutes work with older CNC routers that have lower spindle rigidity?
The compression geometry reduces tear-out on both faces, but rigid spindle and secure workpiece clamping are essential to prevent vibration and tool deflection.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
