YINGHUA
YINGHUA 10pc 6x22x50mm Two Flute Up Down Spiral Carbide End Mill Bits
A 10-piece carbide end-mill set with 6 mm shanks, 22 mm flutes and 50 mm overall length for compression cuts in wood and PVC
- TypeRight-Angle Drills
- 10-piece set covers multiple CNC jobs
- Up-down spiral compression cut prevents tear-out on wood and PVC
- Tungsten-steel carbide construction resists wear during extended use
- 6 mm shank, 22 mm cutting length, 50 mm overall suits standard collets
- Industrial-grade cutters designed for plywood, particleboard and solid wood
10-Piece Compression End Mill Set
This 10-piece set provides two-flute up-and-down spiral carbide end mills for CNC routing. Each cutter measures 6 mm in shank diameter with a 22 mm cutting length and 50 mm overall length. The compression geometry shears fibres in both directions, delivering clean edges on double-sided laminates and solid wood. Tungsten steel construction resists wear during extended production runs.
Check Shank Compatibility and Work-Holding
Verify that your CNC spindle or router collet accepts a 6 mm shank before ordering. Ensure the machine provides sufficient rigidity and dust extraction for the 22 mm depth of cut. The cutters are rated for industrial use only and must not be operated by anyone under 18 years of age. Secure workpieces firmly to prevent vibration that could chip the carbide.
Suited for High-Volume Wood and Composite Cutting
Woodworkers and sign makers processing plywood, particleboard, density board or solid wood will benefit from the clean top and bottom surfaces these bits produce. Shops needing larger diameters, longer reach or specialised coatings for abrasive composites should look elsewhere. Hobbyists without industrial-grade dust collection or rigid gantries may find the tooling excessive for occasional use.
Highlights
- 10-piece set covers multiple CNC jobs
- Up-down spiral compression cut prevents tear-out on wood and PVC
- Tungsten-steel carbide construction resists wear during extended use
- 6 mm shank, 22 mm cutting length, 50 mm overall suits standard collets
- Industrial-grade cutters designed for plywood, particleboard and solid wood
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
What comes in the box and do I need to buy anything else to use them?
The pack contains 10 pieces of 6x22x50mm two-flute up-down spiral carbide end mills, each in a single independent package. No extra items are required for CNC milling of wood, plywood, density board, solid wood or particleboard.
How do I choose between the available versions or capacities of this cutter?
Only one specification is offered: 10 cutters sized 6x22x50mm made from tungsten steel. There are no alternative diameters, lengths or flute counts to select from.
What does the 6x22x50mm size mean when the bit is running in my CNC machine?
The shank is 6mm, the cutting length is 22mm and the overall length is 50mm. The up-down spiral geometry gives a compression cut that reduces tear-out on both faces of wood, plywood and composite boards.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
