YINGHUA
YINGHUA 10pc 6×15×50 mm two-flute up/down carbide end mill bits
Ten carbide end mills with up/down spirals cut wood, plywood and particleboard cleanly
- TypeRight-Angle Drills
- 10-piece set equips CNC machines for continuous production
- Up/down spiral flutes compress fibres for clean edges in wood and PVC
- Tungsten-steel construction resists wear during prolonged cutting sessions
- 6 mm shank with 15 mm cut length suits detailed profiling work
- 50 mm overall length provides reach for deeper passes
10-piece compression end-mill set
This set contains ten solid-tungsten-steel end mills with a two-flute up-cut and down-cut geometry. Each cutter measures 6 mm in diameter, 15 mm in flute length and 50 mm overall. They are supplied as individual pieces for CNC routing work.
Suited for wood and composite routing
The compression profile reduces tear-out on the top and bottom faces of plywood, density board, solid wood and particleboard. They are not intended for metal, glass, stone or any abrasive non-wood material that would dull the carbide rapidly.
6 mm diameter, 15 mm flute, 50 mm overall
This single size determines whether the bits suit your tool holder and the depth of cut you require. Verify the shank diameter and maximum cutting depth against your machine before ordering.
Highlights
- 10-piece set equips CNC machines for continuous production
- Up/down spiral flutes compress fibres for clean edges in wood and PVC
- Tungsten-steel construction resists wear during prolonged cutting sessions
- 6 mm shank with 15 mm cut length suits detailed profiling work
- 50 mm overall length provides reach for deeper passes
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
Will these 6×15×50 mm carbide bits fit the ER collet I already use on my CNC router?
The shank diameter is 6 mm, so they will seat in any standard 6 mm ER collet or collet nut you currently run.
How can I confirm the up/down spiral is cutting cleanly on my first test piece?
Run a shallow pass in plywood or density board; a clean top and bottom edge with no tear-out shows the compression geometry is working.
Does the pack include ten individual cutters or do I need to order extra pieces for a full set?
The box contains ten separate up/down cutters — one per independent package — so no additional bits are required.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
