YINGHUA
YINGHUA 10pc 5x22x50mm Two Flute Up Down Cut Carbide End Mill Cutter Bits
Set of ten 5 mm carbide end mills with 22 mm flute length and 50 mm overall length for compression cutting wood and PVC
- TypeRight-Angle Drills
- 10-piece set equips a CNC machine for multiple jobs
- Two-flute up-cut and down-cut geometry gives clean edges on both faces
- 5 mm shank, 22 mm flute and 50 mm overall length suit precise profiling
- Tungsten-steel construction resists wear when cutting wood, plywood and particleboard
- Industrial-grade cutters designed for users aged 18 and over
10-Piece Carbide Compression Cutters
This set contains ten tungsten-steel compression end mills sized 5x22x50mm. The up-cut and down-cut flute geometry shears material from both faces to leave clean edges on wood, plywood, particleboard and density board. They are intended for CNC routing where a single pass must finish both surfaces.
Check shank fit and machine rigidity
Verify that your CNC spindle or router collet accepts a 5mm shank before ordering. Confirm the machine has sufficient Z-axis travel for the 22mm cutting length and that the frame is rigid enough to prevent chatter at the feed rates required for compression tooling.
Tungsten steel construction with single packaging
Each cutter is individually wrapped to protect the sharp flutes during storage and handling. The tungsten steel body resists wear in abrasive sheet goods, extending tool life between changes. The right-hand spiral suits standard clockwise spindle rotation on most CNC routers.
Highlights
- 10-piece set equips a CNC machine for multiple jobs
- Two-flute up-cut and down-cut geometry gives clean edges on both faces
- 5 mm shank, 22 mm flute and 50 mm overall length suit precise profiling
- Tungsten-steel construction resists wear when cutting wood, plywood and particleboard
- Industrial-grade cutters designed for users aged 18 and over
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
What comes in the box and do I need to buy anything else?
The pack contains 10 individual carbide end-mill cutters measuring 5 mm shank diameter, 22 mm cutting length and 50 mm overall length. No extra components or accessories are required for use.
Should I choose a different flute count or diameter for my CNC router?
All 10 cutters are identical two-flute up-down spiral tools with a 5 mm shank, 22 mm flute length and 50 mm total length; there are no alternative versions in this listing.
What does the 22 mm cutting length mean when the bit is in my machine?
It gives you up to 22 mm of effective flute engagement per pass, allowing full-depth compression cuts in wood, plywood, density board, solid wood and particleboard without tool deflection.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
