YINGHUA
YINGHUA 10pc 4x17x45mm Two Flutes Up Down Cut Carbide End Mill Cutters
Set of 10 tungsten steel compression cutters with up-and-down flutes for clean CNC cuts in wood and PVC
- TypeRight-Angle Drills
- 10-piece set covers multiple CNC jobs
- Two-flute up/down spiral gives clean compression cuts
- 4 mm shank, 17 mm flute, 45 mm overall length
- Tungsten steel carbide resists wear in wood and PVC
- Suitable for plywood, density board, solid wood, particleboard
10-piece carbide compression set
This 10-piece set supplies 4 mm shank compression cutters with 17 mm cutting length and 45 mm overall length. Each two-flute tool combines up-cut and down-cut spirals to shear wood fibres cleanly on both faces. Tungsten steel construction resists wear during extended CNC runs. The pack suits production shops that need consistent edge quality on laminated panels.
Thermals noise and power draw
Carbide tools generate heat only through material friction, so spindle load and feed rate determine temperature rise. No electrical consumption or acoustic signature belongs to the cutters themselves. Proper chip evacuation and coolant mist keep tip temperatures stable during long profiling passes. Operators should monitor spindle bearings for overload rather than the cutters.
Single independent packaging
Every cutter ships in its own protective sleeve, preventing edge contact during storage and transit. The individual packs let machinists pull one tool at a time without exposing the rest to dust or humidity. No software, collets or sharpening jigs are included. Buyers who need tool holders or diamond hones must source them separately.
Highlights
- 10-piece set covers multiple CNC jobs
- Two-flute up/down spiral gives clean compression cuts
- 4 mm shank, 17 mm flute, 45 mm overall length
- Tungsten steel carbide resists wear in wood and PVC
- Suitable for plywood, density board, solid wood, particleboard
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
How do I install the 4x17x45mm carbide end mill in my CNC collet without damaging the shank?
Insert the 4 mm shank fully into a matching ER collet, tighten the collet nut to the machine maker's torque value, and avoid side-loading the flutes during tool changes.
When will the up-down flutes on these tungsten-steel cutters need replacement?
Replace the cutters when the compression edges show visible rounding, chip load drops, or surface finish on plywood and density board deteriorates.
What limits continuous cutting depth with the 17 mm flute length on solid wood?
The 17 mm flute length sets the maximum single-pass depth; deeper cuts require multiple passes to prevent deflection and overheating.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
