YINGHUA
YINGHUA 10 pieces 6X32X60MM Two Flutes UP And DOWN Cut Spiral Carbide Mill Cutters
Ten carbide mill cutters with up-and-down flutes cut wood, plywood and particleboard cleanly
- TypeRight-Angle Drills
- Ten-piece set keeps CNC jobs running without frequent reordering
- Up-and-down flute geometry gives clean edges on both faces of the workpiece
- Tungsten-steel construction resists wear when cutting abrasive panel materials
- 6 mm shank with 32 mm cut length and 60 mm overall length fits standard collets
- Suitable for wood, plywood, density board, solid wood and particleboard
10-Piece Tungsten Steel Milling Set
This set contains ten spiral carbide mill cutters with a 6 mm shank, 32 mm cutting length and 60 mm overall length. Each cutter features two flutes with an up-and-down compression geometry designed for clean edges on both faces of the workpiece. The tools are manufactured from tungsten steel for wear resistance in CNC routing applications.
Woodworkers and CNC operators cutting sheet goods
The compression profile suits users machining plywood, particleboard, density board and solid wood where tear-out on the top or bottom surface must be avoided. Buyers needing single-flute cutters for chip clearance in plastics, or tools with a different shank diameter for non-ER collets, should look at alternative ranges.
Ten cutters give spares for production runs
The pack quantity provides immediate replacements when a flute chips or dulls during extended cutting of abrasive sheet materials. Cutting length of 32 mm limits the maximum depth of cut in a single pass, so thick hardwood stock requires multiple passes or a longer-flute tool. The 18-year age restriction also means the set cannot be used in educational workshops with younger students.
Highlights
- Ten-piece set keeps CNC jobs running without frequent reordering
- Up-and-down flute geometry gives clean edges on both faces of the workpiece
- Tungsten-steel construction resists wear when cutting abrasive panel materials
- 6 mm shank with 32 mm cut length and 60 mm overall length fits standard collets
- Suitable for wood, plywood, density board, solid wood and particleboard
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
Do I need a CNC machine with a 6 mm collet to use these 6X32X60MM cutters?
Yes, the shank diameter is 6 mm, so a CNC router or spindle equipped with a 6 mm collet is required to hold each cutter securely.
Will the up-and-down flute geometry reduce tear-out on the double-sided plywood I already use?
The opposing flutes shear fibres in both directions, giving cleaner top and bottom edges on laminated or double-sided boards such as plywood and density board.
How can I confirm the cutters are performing correctly after the first test cut?
Inspect the workpiece for smooth, chip-free edges on both faces and listen for steady, low-vibration cutting — these indicate the tungsten-steel cutters are running true.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
