YINGHUA
YINGHUA 10 pieces 6X32X60MM DLC Coat Two Flutes UP And DOWN Cut Spiral Carbide Mill Cutters
A 10-piece set of DLC-coated carbide cutters with up-and-down flutes for clean compression cuts in wood and PVC
- TypeRight-Angle Drills
- 10-piece set provides multiple cutters for continuous workflow
- DLC coating reduces friction and extends cutter life
- Two-flute up-and-down spiral design compresses material for clean edges on both faces
- Tungsten steel construction delivers hardness for wood, plywood, density board and particleboard
- 6 mm shank, 32 mm cutting length and 60 mm overall length fit standard CNC collets
10-Piece DLC Coated Carbide Mill Cutters
This set contains ten 6X32X60MM two-flute spiral carbide mill cutters with a DLC coating. They are designed for compression cutting in wood, plywood, density board, solid wood and particleboard. The cutters suit CNC machinery operators who need precise, clean edges on these materials. Industrial users will value the tungsten steel construction for durability.
Suited for CNC wood and PVC compression cuts
These bits suit workshops cutting wood, plywood, density board, solid wood and particleboard on CNC routers. The up-and-down flute geometry reduces tear-out on double-sided laminates. They are not for hand-held routing or non-CNC machines. Buyers needing different diameters, flute counts or cutting lengths must look elsewhere. The product is restricted to users aged 18 and over.
6X32X60MM up-and-down compression geometry
The critical specification is the 6X32X60MM size combined with the two-flute up-and-down spiral design. This geometry shears fibres in opposite directions to prevent chipping on both faces of the workpiece. Verify that your CNC collet accepts the shank and that your machine clearance accommodates the cutting length. Compatibility with your specific material thickness and feed rates determines success.
Highlights
- 10-piece set provides multiple cutters for continuous workflow
- DLC coating reduces friction and extends cutter life
- Two-flute up-and-down spiral design compresses material for clean edges on both faces
- Tungsten steel construction delivers hardness for wood, plywood, density board and particleboard
- 6 mm shank, 32 mm cutting length and 60 mm overall length fit standard CNC collets
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
How do I install the 6 mm shank cutters in my CNC collet without vibration?
Use a clean 6 mm collet, tighten the nut to the machine torque spec, and ensure the 32 mm flute length clears the workpiece before starting the spindle.
When should I replace the DLC coated cutters after cutting plywood and particleboard?
Replace them when the up-and-down flutes show rounded edges, chipping on the tungsten steel, or when cut quality drops on 60 mm deep passes.
What limits continuous cutting depth with these 60 mm long compression bits?
The 32 mm flute length and 60 mm overall length restrict chip evacuation, so heat builds up first on deep slots in dense board.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
