YINGHUA
YINGHUA 10 pieces 6X22X50MM BlueNano Two Flutes UP And DOWN Cut Spiral Carbide Mill Cutters
Set of ten tungsten-steel up-and-down spiral cutters, 6 × 22 × 50 mm, for clean compression cuts in wood, plywood and PVC
- TypeRight-Angle Drills
- 10-piece set covers multiple CNC jobs
- BlueNano coating reduces heat during cutting
- Up-and-down flute geometry compresses chips in wood and PVC
- Tungsten steel body keeps edges sharp longer
- 6×22×50 mm shank fits standard CNC collets
10-Piece BlueNano Carbide Mill Cutter Set
This set contains ten spiral carbide mill cutters with a 6 mm shank, 22 mm cutting length and 50 mm overall length. The two-flute up-and-down compression geometry is designed for clean edges on wood, plywood, density board, solid wood and particleboard. They suit CNC operators and workshop users who need precise profiling and through-cuts in sheet goods.
Compression Geometry Limits Tear-Out
The opposing flute directions push chips toward the centre of the workpiece, reducing splintering on both faces during a single pass. This approach works best when the full 22 mm cutting length is engaged; shallow passes leave the down-cut section inactive and can still mark the top surface. The cutters are rated for industrial cutting only and must not be used by anyone under 18 years of age.
Replaces Single-Direction Bits for Double-Faced
Compared with standard up-cut or down-cut bits, these compression cutters eliminate the need to flip panels or run separate finishing passes on laminated or veneered boards. The upgrade is worthwhile when edge quality on both sides matters and the machine can maintain the feed rates required by the carbide substrate. They are not suited for hand-held routing or non-rigid setups.
Highlights
- 10-piece set covers multiple CNC jobs
- BlueNano coating reduces heat during cutting
- Up-and-down flute geometry compresses chips in wood and PVC
- Tungsten steel body keeps edges sharp longer
- 6×22×50 mm shank fits standard CNC collets
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
Should I choose the 10-piece set or buy individual cutters?
The set provides 10 identical 6X22X50MM BlueNano two-flute up-and-down cut spiral carbide mill cutters in one package, suited for batch CNC work on wood, plywood, density board, solid wood and particleboard.
What does the 6X22X50MM size mean when the cutter is in my CNC machine?
It indicates a 6 mm shank diameter, 22 mm cutting length and 50 mm overall length, so the tool fits standard 6 mm collets and gives 22 mm of cutting depth per pass.
How does the up-and-down cut geometry affect chip removal in wood and PVC?
The opposing flute directions compress the workpiece from both sides, reducing tear-out on top and bottom surfaces while evacuating chips upward and downward for cleaner edges in wood, plywood and PVC.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
