YINGHUA
YINGHUA 10 pieces 5X17X50MM Two Flutes UP And DOWN Cut Spiral Carbide Mill Cutters
Set of ten tungsten-steel spiral cutters with up-and-down flutes for clean compression cuts in wood, plywood and particleboard
- TypeRight-Angle Drills
- 10-piece set covers multiple jobs with one purchase
- Up-and-down spiral flutes compress material for clean edges on both faces
- Tungsten steel body resists wear during extended cutting sessions
- 5 mm shank fits standard CNC collets for quick tool changes
- Suitable for wood, plywood, density board and particleboard
10-piece 5×17×50 mm carbide milling set
This set contains ten two-flute up-and-down cut spiral carbide mill cutters measuring 5 by 17 by 50 millimetres. The cutters are made from tungsten steel and are designed for compression cutting in wood, plywood, density board, solid wood and particleboard. They serve as direct replacements for CNC machinery tooling. The pack includes ten individually packaged cutters.
Check shank diameter and collet compatibility
Verify that your CNC spindle or router accepts a 5 mm shank before ordering. Ensure the machine provides sufficient clearance for the 17 mm cutting length and 50 mm overall length. Confirm the material you intend to cut matches the listed applications of wood, plywood, density board, solid wood and particleboard. The product is not suitable for users under 18 years of age.
Suits CNC operators cutting wood composites
This set suits CNC operators who need a batch of compression cutters for wood-based sheet goods and solid timber. It is not for metalworking, masonry or plastic fabrication beyond the listed wood materials. Buyers who require different shank sizes, cutting geometries or larger diameters should look at other tooling options. The cutters are intended for industrial cutting use only.
Highlights
- 10-piece set covers multiple jobs with one purchase
- Up-and-down spiral flutes compress material for clean edges on both faces
- Tungsten steel body resists wear during extended cutting sessions
- 5 mm shank fits standard CNC collets for quick tool changes
- Suitable for wood, plywood, density board and particleboard
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
What exactly comes in the package and is there anything else I need to buy to use them?
The box contains 10 separate carbide cutters, each 5 mm in diameter with a 17 mm flute length and 50 mm overall length. No extra items are included.
There is only one size listed — how do I know it is the right one for my job?
The single 5x17x50 mm size suits CNC routing of wood, plywood, density board, solid wood and particleboard where that diameter and depth of cut are required.
What does the up-and-down spiral design actually do when the bit is cutting?
The opposing flutes push chips both upward and downward, compressing the material faces to reduce tear-out on both the top and bottom surfaces of the workpiece.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
