YINGHUA
YINGHUA 10 pieces 3.175X22X45MM Two Flutes UP And DOWN Cut Spiral Carbide Mill Cutters
Set of 10 two-flute up-and-down spiral carbide cutters, 3.175×22×45 mm, for clean compression cuts in wood, plywood and PVC
- TypeRight-Angle Drills
- 10-piece carbide set handles wood, plywood and particleboard
- Up-and-down spiral geometry reduces tear-out on both faces
- Tungsten steel construction resists wear during extended CNC runs
- 175 mm shank fits standard collets for quick tool changes
- Not for users under 18; industrial cutting only
10-piece carbide milling cutter set
This set contains ten tungsten-steel spiral cutters measuring 3.175 by 22 by 45 millimetres. Each bit has two flutes with an up-and-down compression geometry designed for CNC machinery. The cutters suit wood, plywood, density board, solid wood and particleboard. They are sold new in single independent packages.
Compression geometry limits tear-out
The opposing flute directions push chips toward the centre of the cut, reducing splintering on both faces of laminated or veneered sheet goods. This behaviour works best when the full 22-millimetre cutting length is engaged in the material. Shallow passes or very thin stock may not benefit from the compression action. The tool is intended for industrial cutting use only.
3.175-millimetre shank diameter
This dimension determines whether the cutters fit your collet or tool holder. Machines requiring a different shank size cannot use these bits without an adapter. The set is not suited for hand-held routers that lack a 3.175-millimetre collet or for users under 18 years of age.
Highlights
- 10-piece carbide set handles wood, plywood and particleboard
- Up-and-down spiral geometry reduces tear-out on both faces
- Tungsten steel construction resists wear during extended CNC runs
- 175 mm shank fits standard collets for quick tool changes
- Not for users under 18; industrial cutting only
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
Should I choose the 10-piece pack or buy individual cutters?
The set contains 10 identical cutters so you have replacements ready for high-volume CNC work without reordering.
What does the 3.175 mm shank diameter mean for my CNC router?
A 3.175 mm shank fits 1/8 inch collets common on many desktop CNC machines, allowing direct installation.
How does the up-and-down spiral geometry affect cutting in wood and PVC?
The opposing flutes push chips both up and down, compressing the material to reduce tear-out on both faces of plywood, density board and solid wood.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
