YINGHUA
YINGHUA 10 pieces 3.175X17X38 BlueNanoTwo Flutes UP And DOWN Cut Spiral Carbide Mill Cutters
Set of 10 tungsten-steel compression cutters with up-and-down flutes for clean CNC milling of wood and PVC
- TypeRight-Angle Drills
- 10-piece set covers multiple jobs
- Tungsten steel resists wear during heavy cuts
- Up-and-down spiral clears chips from wood and PVC
- 175 mm shank fits standard CNC collets
- 17 mm cut depth with 38 mm overall length
10-piece carbide milling cutter set
This 10-piece set provides BlueNano two-flute up-and-down cut spiral carbide mill cutters. Each cutter measures 3.175X17X38 and is made from tungsten steel. They are designed for compression cutting in wood, plywood, density board, solid wood and particleboard. The pack suits CNC machinery operators needing precise replacement cutters.
Check shank diameter and machine compatibility
Verify that your CNC machine accepts a 3.175 shank diameter before ordering. Ensure the 17 cutting length and 38 overall length suit your project depth requirements. Confirm the spindle can handle two-flute carbide tooling at appropriate feed rates. These cutters are not for use by anyone under 18 years of age.
Independent single packaging per cutter
Each of the 10 cutters ships in its own independent package for protection and organisation. This packaging keeps the tungsten steel edges sharp during storage and transport. It allows you to open only the cutters needed for a specific job. The set contains no additional software, clamps or collets.
Highlights
- 10-piece set covers multiple jobs
- Tungsten steel resists wear during heavy cuts
- Up-and-down spiral clears chips from wood and PVC
- 175 mm shank fits standard CNC collets
- 17 mm cut depth with 38 mm overall length
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
What comes in the box and what must I supply?
The pack contains ten individual BlueNano two-flute up-and-down cut spiral carbide mill cutters measuring 3.175×17×38 mm; you provide the CNC machine and collets.
Which diameter and length suit my material thickness?
Each cutter has a 3.175 mm shank, 17 mm cutting length and 38 mm overall length, so choose this set when your stock fits within that cutting depth.
How does the up-and-down geometry perform in plywood?
The opposing flutes shear the top and bottom faces simultaneously, giving clean edges on plywood, density board and solid wood without tear-out.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
