YINGHUA
YINGHUA 10 pieces 3.175X12X38MM Two Flutes UP And DOWN Cut Spiral Carbide Mill Cutters
Set of ten two-flute up-and-down spiral carbide cutters sized 3.175 by 12 by 38 millimetres for compression cutting wood and PVC
- TypeRight-Angle Drills
- 10-piece set covers multiple CNC jobs
- Two-flute up/down spiral gives clean compression cuts
- 175 mm shank fits standard collets
- 12 mm cutting length handles thick stock
- Tungsten steel construction resists wear in wood and PVC
10-piece carbide mill cutter set
This set contains ten tungsten steel milling cutters with a 3.175 mm shank diameter, 12 mm cutting length and 38 mm overall length. Each bit features two flutes in an up-and-down spiral geometry for compression cutting. They are intended for CNC routing of wood, plywood, density board, solid wood and particleboard. The cutters are supplied new in individual packaging.
Check shank fit and material suitability
Verify that your CNC spindle or router collet accepts a 3.175 mm shank before ordering. Confirm the workpiece materials match the listed applications such as wood, plywood and particleboard. The supplier states the blades are not for use by persons under 18 years and are intended for industrial cutting only. Ensure your machine provides adequate rigidity and dust extraction for carbide tooling.
Replaces worn compression router bits
These cutters replace dull or damaged compression spiral bits that leave fuzzy edges on double-sided laminates or veneered panels. The up-and-down flute design shears fibres in both directions, reducing tear-out on top and bottom faces. The upgrade is worthwhile when existing single-direction bits cause excessive sanding or rework on through-cuts in sheet goods.
Highlights
- 10-piece set covers multiple CNC jobs
- Two-flute up/down spiral gives clean compression cuts
- 175 mm shank fits standard collets
- 12 mm cutting length handles thick stock
- Tungsten steel construction resists wear in wood and PVC
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
Does the 10-piece set include everything needed to start cutting, or must a collet or holder be bought separately?
The box contains ten 3.175 mm shank cutters, each individually packaged; a compatible collet or tool holder for 3.175 mm shanks is not included and must be sourced separately.
All ten cutters share the same 3.175X12X38MM specification, so there is no capacity or version choice to make?
Correct — every cutter in the set is a two-flute up-and-down spiral carbide mill with a 3.175 mm shank, 12 mm cutting length and 38 mm overall length, so the pack offers a single uniform specification.
What does the 12 mm cutting length mean when the bit is spinning in a CNC router?
It defines the maximum depth of material that can be engaged in a single pass; the up-and-down flute geometry compresses chips toward the centre, giving clean edges on both faces of wood, plywood, density board, solid wood or particleboard up to that depth.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
