YINGHUA
YINGHUA 10-piece 6×25×50 mm Two-Flute Up/Down Cut Carbide Mill Cutters
Ten carbide cutters with up-cut and down-cut flutes for clean edges on wood, plywood and PVC
- TypeRight-Angle Drills
- 10-piece set covers multiple CNC jobs
- Up/down cut geometry gives clean edges on wood and PVC
- Tungsten steel construction resists wear during extended use
- Suitable for plywood, density board and particleboard
- Industrial-grade cutters designed for users aged 18 and over
10-piece carbide milling set
This set contains ten tungsten-steel cutters measuring 6 mm shank, 25 mm cutting length and 50 mm overall length. The two-flute up-and-down spiral geometry gives a compression cut that reduces tear-out on both faces of the workpiece. They are supplied as individually packaged bits ready for CNC machinery. The cutters suit wood, plywood, density board, solid wood and particleboard.
Capacity and headroom
Ten pieces provide enough cutters for extended production runs or multiple tool changes without reordering. The 25 mm cutting depth handles typical sheet goods and solid stock in a single pass. Harder materials or very deep pockets will exceed the flute length and require a longer tool. The right-angle drill format limits use to machines that accept that shank style.
Upgrade path
The set replaces worn or single-flute bits that leave fuzzy edges on double-sided panels. Shops moving from high-speed steel to carbide gain longer edge life and faster feed rates. The jump is worth it when tear-out on the bottom face becomes a quality issue or when tool-change downtime adds up. Buyers needing larger diameters, different shank sizes or specialised coatings will need a different product.
Highlights
- 10-piece set covers multiple CNC jobs
- Up/down cut geometry gives clean edges on wood and PVC
- Tungsten steel construction resists wear during extended use
- Suitable for plywood, density board and particleboard
- Industrial-grade cutters designed for users aged 18 and over
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
Will the 6 mm shank on these 10 carbide cutters fit the collet of my older CNC router?
Each cutter has a 6 mm shank, a standard size for many hobby and light-industrial routers, so it will fit any collet that accepts 6 mm tooling.
How can I confirm the up/down compression geometry is cutting cleanly on plywood after installation?
Run a test cut in scrap plywood; a proper compression cut leaves both top and bottom faces free of tear-out and produces a smooth edge with no fuzz.
Does the single independent package contain all 10 cutters or must I order additional packs?
The package includes 10 individual cutters, each in its own protective sleeve, so no extra packs are needed for the full set.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
