YINGHUA
YINGHUA 10 pcs 8x42x80mm Two Flutes Up Down Cut Spiral Carbide Mill Cutters
A set of ten tungsten-steel up-down spiral cutters, 8 × 42 × 80 mm, for clean compression cuts in wood and PVC on CNC machines
- TypeRight-Angle Drills
- 10-piece set covers multiple CNC jobs without reordering
- Up-and-down spiral flutes compress top and bottom surfaces for clean edges
- Tungsten-steel carbide resists wear during prolonged cutting sessions
- Suited for wood, plywood, density board, solid wood and particleboard
- 8 mm shank fits standard CNC collets for quick tool changes
10-piece 8 mm carbide milling set
This set supplies ten 8 mm shank compression cutters with a 42 mm flute length and 80 mm overall length. The two-flute up-down geometry produces clean edges on both faces of the workpiece. Tungsten steel construction resists wear during extended CNC runs. Intended for wood, plywood, density board, solid wood and particleboard.
Industrial-grade tooling for CNC operators
Cutters arrive individually packaged and ready to mount in compatible collets or tool holders. Right-angle drill compatibility must be verified against the machine spindle specification before use. The up-down spiral demands rigid clamping and appropriate feed rates to prevent vibration. Not suited for handheld routers or non-industrial cutting tasks.
42 mm cutting depth per pass
Each flute removes material up to its 42 mm length, giving ample headroom for thick panel processing. Tungsten steel maintains edge life through repeated cuts in abrasive composites. Tool life decreases when feed and speed exceed the carbide grade limits. Buyers needing longer reach or smaller diameters must source alternative tooling.
Highlights
- 10-piece set covers multiple CNC jobs without reordering
- Up-and-down spiral flutes compress top and bottom surfaces for clean edges
- Tungsten-steel carbide resists wear during prolonged cutting sessions
- Suited for wood, plywood, density board, solid wood and particleboard
- 8 mm shank fits standard CNC collets for quick tool changes
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
How can I confirm the up-down spiral cutters are working correctly after installing them in my CNC machine?
Run a test cut in wood or plywood; the two-flute up-down design should leave clean edges on both faces without tear-out, showing the compression action is functioning.
What exactly is included in the package and do I need to purchase any collets or holders separately?
The box contains ten individual 8 mm shank cutters each measuring 42 mm flute length and 80 mm overall; collets or tool holders matching an 8 mm shank are not included.
All ten cutters appear identical — are there different diameters or lengths in this set that I should choose between?
Every cutter in the set shares the same 8 mm diameter, 42 mm cutting length and 80 mm total length, so there are no alternative versions to select from.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
