Yescom USA, Inc.
Yescom USA, Inc. 37PUM012-1200W-03 1200W Electric Water Booster Pump pool accessory
1200W booster pump delivers 814 GPH at 67 PSI with 26 ft suction and thermal overload protection
- TypePool Pump/Filter Systems
- Features1200W Electric Water Booster Pump, 814GPH (3700L/H) water fl
- Transfers water quickly with 814 GPH flow and 67 PSI pressure
- Automatic shut-off at 302°F protects the motor from overheating
- Waterproof switch and IPX4 rating reduce electric-shock risk
- 304 stainless-steel pump head resists corrosion for longer life
- Compact 34 x 19 x 24 cm design with handle for easy carrying
Compact pool pump for water transfer
The 1200W electric booster pump moves up to 814GPH at 67 PSI through a G1-inch thread. Its 304 stainless steel head resists corrosion during pool, sprinkler or flood-drainage tasks. A 26ft suction lift lets it draw from barrels, covers or sunken areas. The unit measures 34 by 19 by 24 centimetres and weighs 3 kilograms.
Thermal protection and IPX4-rated electrics
An internal thermal cut-out stops the motor at 302°F to prevent overheating during extended runs. The waterproof on/off switch and IPX4-rated housing guard against splashes and accidental electric shock. A 110-centimetre UL-certified cable connects to standard mains power without additional adapters.
Stainless head and safety certifications
The 304 stainless steel pump head outlasts aluminium equivalents in chlorinated or dirty water. CE marking on the pump and UL listing on the cable confirm compliance with European and North American safety standards. Users must prime the head with water before each start and keep debris below 1mm to avoid blockage.
Highlights
- Transfers water quickly with 814 GPH flow and 67 PSI pressure
- Automatic shut-off at 302°F protects the motor from overheating
- Waterproof switch and IPX4 rating reduce electric-shock risk
- 304 stainless-steel pump head resists corrosion for longer life
- Compact 34 x 19 x 24 cm design with handle for easy carrying
Specifications
| Brand | Yescom |
|---|---|
| Model | 37PUM012-1200W-03 |
| Type | Pool Pump/Filter Systems |
| Features | 1200W Electric Water Booster Pump, 814GPH (3700L/H) water flow and 67 PSI water pressure to transfer water quickly, can be used to solve backyard flooding problem, to irrigate back lawn with sprinklers, to pump water for pool, an ideal device for water draining or pumping^^Safe to Use - With thermal overload protection, machine will automatically shut off if temperature reaches up to 302℉, CE certificated pump and UL certificated cable guarantee safety, IPX4 Water Resistance for pump surface and waterproof on/off switch avoid accidental electric shock caused by water-spilling^^Easy t |
Questions about this item
How do I install the 1200W booster pump and what step causes damage if skipped?
Prime the 304 stainless steel pump head with water before starting; dry running damages the 1200W motor. Connect G1" hose fittings to the 26ft suction inlet and discharge port, then plug the 43in UL cable into a GFCI outlet.
What maintenance will the 37PUM012-1200W-03 need over time?
Clean the 1mm particle strainer after each use to maintain 814GPH flow. Inspect the 304 stainless steel pump head and IPX4 seals for corrosion; replace worn seals to keep 67 PSI pressure.
What limit appears first during continuous operation of the 1200W pump?
The thermal overload protection shuts the motor off at 302°F, which is the first limit reached under sustained 1200W load.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
