Yellow Jacket
Yellow Jacket 21060 60 in charging vacuum hose
A 60 in yellow rubber hose with brass fittings rated for 800 psi working pressure and 4,000 psi burst pressure for refrigerant charging and evacuation
- ColorYellow
- 60 in length gives full reach across service bays
- 800 psi working pressure handles high-side refrigerant charging
- 4000 psi burst rating adds safety margin during pressure spikes
- Double-barrier construction resists permeation and moisture ingress
- Brass fittings with 1/4 in female ends ensure leak-free connections
60-inch refrigerant charging hose
The Yellow Jacket 21060 is a single 60-inch hose built for refrigerant charging and evacuation tasks. It uses a 1/4-inch female connection with a 0-degree angle and features brass fittings on a rubber hose body. The double-barrier construction supports a working pressure of 800 psi and a burst pressure of 4,000 psi.
Straight fitting eases tight connections
The 0-degree brass fitting threads directly onto 1/4-inch ports without an angled adapter, reducing the leverage that can loosen a connection under vibration. Rubber material stays flexible in cold conditions, but the single-hose design means you must swap ends or use a manifold when switching between charging and vacuum duties.
800 psi working pressure sets the practical limit
The hose is rated for 800 psi working pressure, so it cannot be used on systems that exceed this threshold during operation. The 4,000 psi burst rating provides a safety margin but does not extend the continuous service limit. The 60-inch length restricts reach between the manifold and the service port.
Highlights
- 60 in length gives full reach across service bays
- 800 psi working pressure handles high-side refrigerant charging
- 4000 psi burst rating adds safety margin during pressure spikes
- Double-barrier construction resists permeation and moisture ingress
- Brass fittings with 1/4 in female ends ensure leak-free connections
Specifications
| Brand | YELLOW JACKET |
|---|---|
| Color | Yellow |
Questions about this item
How do I confirm the hose is holding vacuum after connection?
Apply vacuum and watch the gauge; the hose is rated for 800 psi working pressure and 4,000 psi burst pressure, so it should maintain seal without leaks at the 1/4 in female fittings.
What comes with the Yellow Jacket 21060 and what must I supply?
The package includes one 60 in yellow rubber hose with brass 1/4 in female fittings at 0 degrees; you must provide the manifold gauges, refrigerant cylinders or vacuum pump that mate to those fittings.
Which length should I choose for standard charging and evacuation jobs?
The 60 in length gives enough reach for most residential and light-commercial HVAC work while keeping refrigerant volume low; select a longer hose only if your setup demands extra distance.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
