We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Eight clear PETG tubes, 14mm outer diameter, 10mm inner diameter, 50cm each

XSPC

XSPC TR-5060175585943-8P PETG Tubing 10mm ID 14mm OD 50cm Clear 8-pack

SKU CH-T45F-RMT8M MPN TR-5060175585943-8P

Clear PETG tubing with 10 mm inner diameter, 14 mm outer diameter, 2 mm wall thickness and 50 cm lengths, supplied in an eight-pack

  • TypeTubing
  • High transparency for clear fluid visibility
  • 2 mm wall thickness resists kinking during tight bends
  • 10 mm inner diameter fits standard compression fittings
  • 14 mm outer diameter matches common hard-line dimensions
  • Eight 50 cm lengths give four metres of tubing per pack

Clear PETG tubing for custom loops

XSPC PETG tubing delivers high transparency with a 10mm inner diameter and 14mm outer diameter. The 2mm wall thickness resists kinking during tight-radius bends. Each pack supplies eight 50cm lengths totalling four metres of clear tube. It is intended for builders assembling hard-line water-cooling loops who want a rigid, glass-like appearance.

Thermal behaviour and flow characteristics

PETG material does not soften at typical coolant temperatures and maintains its shape under normal loop pressure. Smooth inner walls minimise flow restriction and reduce pump load. The rigid construction eliminates the vibration noise sometimes heard with flexible tubing under high flow rates. No external power or active cooling is required for the tubing itself.

Fitting compatibility and installation notes

The tubing is specified for use with XSPC fittings only; other brands may not seal correctly on the 14mm outer diameter. Pre-cut 50cm sticks reduce waste and simplify measuring for first-time hard-line builders. No bending tools, silicone inserts or lubricants are included in the pack. Users must supply their own heat gun and compatible fittings to complete the loop.

Highlights

  • High transparency for clear fluid visibility
  • 2 mm wall thickness resists kinking during tight bends
  • 10 mm inner diameter fits standard compression fittings
  • 14 mm outer diameter matches common hard-line dimensions
  • Eight 50 cm lengths give four metres of tubing per pack

Specifications

BrandXSPC
TypeTubing

Questions about this item

How do I install the 10mm ID PETG tubing onto 14mm OD fittings without kinking the 2mm wall?

Warm the 50cm length evenly with a heat gun, push it straight over the 14mm fitting until it seats fully, then let it cool before pressurising; forcing cold tubing is the step that causes kinks.

When will the eight 50cm PETG tubes need replacement in a liquid-cooling loop?

Replace any tube that turns cloudy, develops surface crazing, or stiffens so it no longer seals on the 14mm fittings; PETG has no fixed service interval, so inspect during each coolant change.

What is the first limit reached when the loop runs at high coolant temperature for long periods?

The 2mm wall PETG softens before the 10mm ID collapses, so sustained heat that makes the tubing pliable enough to deform under fitting pressure is the practical limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.